Uidheaman pìoba le grùthangabhail a-steach dà phrìomh roinn toraidh:
Am measg nan goireasan a tha nan ròin ceangail tha ceanglachan teann, ceanglachan sùbailte, tees meacanaigeach, agus flanges claoidhte.
Am measg nan goireasan a tha nan ceanglaichean gluasaid tha uilleanan, tees, croisean, lughdachaidhean, flanges dall, agus feadhainn eile.
Tha trì pàirtean anns a’ mhòr-chuid de na h-innealan claisneach a tha mar ròin ceangail: gasket rubair ròin, taigheadas ceangail, agus bolt glasaidh. Tha an gasket rubair, a tha suidhichte a-staigh, air a chuir air taobh a-muigh na pìoba gus a bhith ceangailte agus a 'co-thaobhadh leis a' phìob ro-grooved. Tha an taigheadas ceangail an uairsin air a cheangal timcheall taobh a-muigh a 'ghasgaid rubair, agus mu dheireadh air a cheangal le dà bholt. Air sgàth dealbhadh sònraichte a’ ghasgaid rubair agus an ceangal, tha feartan seulachaidh sàr-mhath aig goireasan claoidhte. Mar a bhios an cuideam fluid taobh a-staigh na pìoba a ’dol am meud, tha comas seulachaidh a’ cheangail grooved air a leasachadh a rèir sin.
Faodar ceangal pìoban grooved, mar dhòigh ceangail loidhne-phìoban adhartach, a chleachdadh an dà chuid ann an tagraidhean fosgailte agus falaichte, agus a 'gabhail a-steach an dà chuid cruaidh agus sùbailte joints. Mar sin, tha raon farsaing de thagraidhean aige:
A rèir seòrsachadh an t-siostaim: Faodar a chleachdadh ann an siostaman uisge teine, siostaman uisge teth is fuar fionnarachadh-àile, siostaman solar uisge, siostaman loidhne-phìoban peitriceimiceach, cumhachd teirmeach agus siostaman loidhne-phìoban armachd, siostaman loidhne-phìoban làimhseachadh òtrachais, msaa.
A rèir seòrsachadh stuth pìoba: Faodar a chleachdadh airson pìoban stàilinn, pìoban copair, pìoban stàilinn gun staoin, pìoban stàilinn le lìnigeadh plastaig, pìoban iarainn ductile, pìoban plastaig le ballachan tiugh, a bharrachd air pìoban agus uidheam bhalbhaichean le joints pìoban stàilinn agus joints flange.
Coitcheann: ANSI B36.10, JIS B2302, ASME / ANSI / BS1560 / DIN2616 etc.
stuth: Iarann cast
Uachdar: Peantadh Dearg no Peantadh Gorm no Peantadh Airgid
Crois mheacanaigeach (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 100x50(4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65(4x2-1/2) | 114.3x76. 1 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76. 1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65(6x2-1/2) | 165.1x 76. 1 |
| 150x80(6x3) | 165.1x88.9 |
| 150x100(6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x80(8x3) | 219.1x88.9 |
| 200x100(8x4) | 219.1x114.3 |
Crois mheacanaigeach (snàithichte)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8x1) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
TEE MECHANICAL (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 100x50(4x2) | 114,3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x100(8x4) | 219.1x114.3 |
TEE meacanaigeach (snàithichte)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65(4x2-1/2) | 108xRc2-1/2 |
| 100x25(4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
A' Lùghdachadh Tì (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 65x50 (2/1/2x2) | 76.1x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50(4x2) | 114.3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x100(5x4) | 133x108 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x100(6x4) | 159x108 |
| 150x125(6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125(6x5) | 165.1x139.7 |
| 200x50(8x2) | 219.1x60.3 |
| 200x150(8x6) | 219.1x165.1 |
TEE (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 50(2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150 ⑹ | 159 |
| 150(6) | 165.1 |
| 150 ⑹ | 168.3 |
| 200 ⑻ | 219.1 |
A' Lùghdachadh Crois (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 100x65(4x2-1/2) | 114.3x76 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 165.1x76 |
| 150x125(6x5) | 165.1x139. 7 |
| 200x100(8x4) | 219.1x114.3 |
| 200x150(8x6) | 219.1x165.1 |
CROSS (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 65(2-1/2) | 76.1 |
| 80 ⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125 ⑸ | 139.7 |
| 150(6) | 165 |
| 200 ⑻ | 219.1 |
45 ° uilinn
22.5 ° uilinn
90 ° uilinn
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 50 ⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80 ⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125 ⑸ | 133 |
| 125(5) | 139.7 |
| 150 ⑹ | 159 |
| 150 ⑹ | 165 |
| 200 ⑻ | 219.1 |
REDUCER (Snàthainn)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25(3x1) | 88.9xRcl |
| 80x65(3x2-1/2) | 88.9xRc2-1/2 |
| 100x25(4x1) | 108xRcl |
| 100x25(4x1) | 114.3xRcl |
| 125x25(5x1) | 133xRcl |
| 125x25(5x1) | 139.7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 159xRc3 |
| 150x25(6x1) | 165. lxRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8xRcl) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
REDUCER (GROOVED)
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50(3x2) | 88.9x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x65(4x2-1/2) | 108x76.1 |
| 100x80(4x3) | 108x88.9 |
| 100x50(4x2) | 114.3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 133x76.1 |
| 125x100(5x4) | 133x114.3 |
| 125x50(5x2) | 139.7x60.3 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 159x76.1 |
| 150x125(6x5) | 159x139.7 |
| 150x50(6x2) | 165.1x60.3 |
| 150x125(6x5) | 165.1x139.7 |
| 200x65(8x2) | 219.1x60.3 |
| 200x150(8x6) | 219.1x165.1 |
FLANGADH DLEASTANAS HEAVY
(GRÙDADH)
| MÒR GNÌOMHACH (mm/a-staigh) | Trast-thomhas A-muigh (mm) | Bruthadh Obrach (MPA) | Meudan (MM) | CHAN EIL. NA H-UILE | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65 ⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150 ⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150 ⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200 ⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
FLANGADH ADAPTER
(GRÙDADH)
| MÒR GNÌOMHACH (mm/a-staigh) | Trast-thomhas A-muigh (mm) | Bruthadh Obrach (MPA) | Meudan (MM) | CHAN EIL. NA H-UILE | |||
| A | B | c | D | ||||
| 50 ⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80 ⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125 ⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125 ⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150 ⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150 ⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200 ⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
LAOIDH DALL
| MÒR GNÌOMHACH (mm/a-staigh) | Trast-thomhas A-muigh (mm) | Bruthadh Obrach (MPA) | AIRD(MM) | |
| 50 ⑵ | 60.3 | 2.5 | 28 | |
| 65(2-1/2) | 76.1 | 2.5 | 28 | |
| 80 ⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125 ⑸ | 139.7 | 2.5 | 31.5 | |
| 150 ⑹ | 159 | 2.5 | 31.5 | |
| 150 ⑹ | 165.1 | 2.5 | 31 | |
| 200 ⑻ | 219.1 | 2.5 | 36.5 | |
FLANGADH THORACH
| MÒR àbhaisteach (mm/a-staigh) | Trast-thomhas A-muigh (mm) | Bruthadh Obrach (MPA) | Meudan (MM) | CHAN EIL. NA H-UILE | |||
| A | B | c | D | ||||
| 25 ⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32(1-1/4) | Rcl- 1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40(1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80 ⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
Boltaichean & NUTS
| MÒR | LAOIDH SHINN L1 | LAOIDH IOMLAN | WIDTH BOLT FISHTAIL | NUT WIDHT |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14.5 + 0.5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1. 2 | 15.2±0.4 | 11. 6 ~12 |
| M12 x 75 | 41+4 | 75+1. 2 | 15.2±0.4 | 11. 6 ~12 |
| M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3~16 |
| M20 x 120 | 50+5 | 120+2. 0 | 24±0.8 | 18. 9~20 |
Cha bhith feartan meacanaigeach boltaichean nas ìsle na ìre 8.8 a tha air a shònrachadh ann am GB / T 3098.1, agus bidh fulangas snàithlean 6G. Bidh feartan meacanaigeach a ’chnò a’ gèilleadh ri riatanasan Ìre 8 a chaidh a shònrachadh airson cnothan ann am GB / T 3098.2, fulangas snàithlean 6h.
RING GASKET
| AINM | GAIDHEALACH | MOLADH SEIRBHEIS CHOITCHEANN | RAON TEMPERATURE |
| EPDM | E | Solarachadh uisge, drèanadh, òtrachas agus èadhar teòthachd àbhaisteach, searbhag lag agus alkali lag | -30 ° C ~ + 130 ° C |
| NBR | D | Ola stèidhichte air peatrail | -20 ° C〜 + 80 ° C |
| RUBAIR SILICOMN | S | Uisge òil, èadhar teth tioram agus cuid de cheimigean teth | -40 ° C ~ + 180 ° C |
Innealan Pìoba Grùdaidh Blue Painted
Clàr meud mar gu h-àrd
Innealan Pìoba Grooved Painted Sliver
Clàr meud mar gu h-àrd
