Anyị mmepe dabere na elu akụrụngwa, magburu onwe talent na nọgidere na-ewusi technology ike maka ọnụahịa mpempe akwụkwọ maka China Manufacturer Tee / Pipe Elbow / Flange HDPE Pipe Fitting na Butt Fusion Welding / Electrofusion maka ogbugba mmiri n'ubi / mmiri ọkọnọ / Ngwuputa, Anyị n'ụzọ zuru ezu na-anabata shoppers si niile. gburugburu ụwa iji chọpụta mmekọrịta ụlọ ọrụ kwụsiri ike na nke na-arụkọ ọrụ ọnụ, ijikọ ọnụ na-eme ogologo oge dị egwu.
Anyị mmepe na-adabere na elu akụrụngwa, magburu onwe talent na nọgidere ike technology agha makaChina HDPE dabara adaba, HDPE Pipe, Anyị ngwaahịa na ngwọta na tumadi exported ka South-East Asia Euro-America, na ahịa na mba anyị niile. Na dabere na ezigbo mma, ọnụahịa ezi uche dị na ya, ọrụ kacha mma, ugbu a anyị enwetala nzaghachi dị mma n'aka ndị ahịa si mba ofesi. A na-anabata gị isonyere anyị maka ohere na uru ndị ọzọ. Anyị na-anabata ndị ahịa, ndị otu azụmahịa na ndị enyi si n'akụkụ niile nke ụwa ka ha kpọtụrụ anyị ma chọọ nkwado maka uru otu.
Ụgwọ nke ụlọ ọrụ Tianjin Youfa International Trade Co., Ltd
Carbon Steel grooed dabara adaba
Ọkọlọtọ: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 wdg.
Ọkwa igwe: GR.A GR.B
Elu: Esere uhie ma ọ bụ na-acha anụnụ anụnụ ma ọ bụ ọlaọcha na-ese
Obe igwe eji arụ ọrụ (GROVED)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
100x50 (4x2) | 114.3x60.3 |
100x65 (4x2-1/2) | 114.3x73 |
100x65 (4x2-1/2) | 114.3x76. 1 |
100x80 (4x3) | 114.3x88.9 |
125x65 (5x2-1/2) | 139.7x76. 1 |
125x80 (5x3) | 139.7x88.9 |
150x65 (6x2-1/2) | 165.1 x 76. 1 |
150x80 (6x3) | 165.1x88.9 |
150x100 (6x4) | 165.1x114.3 |
200x65 (8x2-1/2) | 219.1x76.1 |
200x80 (8x3) | 219.1x88.9 |
200x100 (8x4) | 219.1x114.3 |
Obe eji arụ ọrụ (THREADED)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
50x25 (2x1) | 60.3xRcl |
65x25 (2-1/2x1) | 76. lxRcl |
65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
80x25 (3x1) | 88.9xRcl |
80x50 (3x2) | 88.9xRc2 |
100x25 (4x1) | 108xRcl |
100x65 (4x2-1/2) | 114.3xRc2-1/2 |
125x25(5x1) | 133xRcl |
125x80 (5x3) | 133xRC3 |
125x25(5x1) | 139.7xRcl |
150x25 (6x1) | 159xRcl |
150x80 (6x3) | 165. 1xRc3 |
200x25 (8x1) | 219. lxRcl |
200x80 (8x3) | 219. 1xRc3 |
AKWỤKWỌ TEEE (GROVED)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
100x50 (4x2) | 114,3x60.3 |
100x80 (4x3) | 114.3x88.9 |
125x65 (5x2-1/2) | 139.7x76.1 |
125x80 (5x3) | 139.7x88.9 |
150x65 (6x2-1/2) | 165.1x76.1 |
150x100 (6x4) | 165.1x114.3 |
200x65 (8x2-1/2) | 219.1x76.1 |
200x100 (8x4) | 219.1x114.3 |
AKWỤKWỌ TEEE (THREADED)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
50x25 (2x1) | 60.3xRcl |
65x25 (2-1/2x1) | 76. lxRcl |
65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
80x25 (3x1) | 88.9xRcl |
80x50 (3x2) | 88.9xRc2 |
100x25 (4x1) | 108xRcl |
100x65 (4x2-1/2) | 108xRc2-1/2 |
100x25 (4x1) | 114.3xRcl |
100x65 (4x2-1/2) | 114.3xRc2-1/2 |
125x25(5x1) | 133xRcl |
125x80 (5x3) | 133xRC3 |
125x25(5x1) | 139.7xRcl |
Na-ebelata tee (GROVED)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
65x50 (2/1/2x2) | 76.1x60.3 |
80x65 (3x2-1/2) | 88.9x76.1 |
100x50 (4x2-1/2) | 108x76.1 |
100x50 (4x2) | 114.3x60.3 |
100x80 (4x3) | 114.3x88.9 |
125x100 (5x4) | 133x108 |
125x65 (5x2-1/2) | 139.7x76.1 |
125x100 (5x4) | 139.7x114.3 |
150x100 (6x4) | 159x108 |
150x125 (6x5) | 159x133 |
150x65 (6x2-1/2) | 165.1 x 76. 1 |
150x125 (6x5) | 165.1x139.7 |
200x50 (8x2) | 219.1x60.3 |
200x150 (8x6) | 219.1x165.1 |
TEE (Emere)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
50(2) | 60.3 |
65 (2-1/2) | 76.1 |
80 (3) | 88.9 |
100 ⑷ | 108 |
100 ⑷ | 114.3 |
125(5) | 133 |
125(5) | 139.7 |
150 ⑹ | 159 |
150 (6) | 165.1 |
150 ⑹ | 168.3 |
200⑻ | 219.1 |
Mbelata obe (Grooveed)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
100x65 (4x2-1/2) | 114.3x76 |
100x80 (4x3) | 114.3x88.9 |
125x65 (5x2-1/2) | 139.7x76 |
125x100 (5x4) | 139.7x114.3 |
150x65 (6x2-1/2) | 165.1x76 |
150x125 (6x5) | 165.1x139. 7 |
200x100 (8x4) | 219.1x114.3 |
200x150 (8x6) | 219.1x165.1 |
OGE (Emerela)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
65 (2-1/2) | 76.1 |
80⑶ | 88.9 |
100 ⑷ | 114.3 |
125⑸ | 139.7 |
150 (6) | 165 |
200⑻ | 219.1 |
45° ikpere
22.5° ikpere
90° ikpere
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
50 ⑵ | 60.3 |
65 (2-1/2) | 76.1 |
80⑶ | 88.9 |
100 ⑷ | 108 |
100 ⑷ | 114.3 |
125⑸ | 133 |
125(5) | 139.7 |
150 ⑹ | 159 |
150 ⑹ | 165 |
200⑻ | 219.1 |
Mbelata (THREADED)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
50x20 (2x3/4) | 60.3xRc3/4 |
50x40 (2x1-1/2) | 60.3xRcl-1/2 |
65x25 (2-1/2x1) | 76. lxRcl |
65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
80x25 (3x1) | 88.9xRcl |
80x65 (3x2-1/2) | 88.9xRc2-1/2 |
100x25 (4x1) | 108xRcl |
100x25 (4x1) | 114.3xRcl |
125x25(5x1) | 133xRcl |
125x25(5x1) | 139.7xRcl |
150x25 (6x1) | 159xRcl |
150x80 (6x3) | 159xRC3 |
150x25 (6x1) | 165. lxRcl |
150x80 (6x3) | 165. 1xRc3 |
200x25(8xRcl) | 219. lxRcl |
200x80 (8x3) | 219. 1xRc3 |
Mbelata (Emere)
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga |
65 x 50 (2-1/2 x 2) | 76.1x60.3 |
80x50 (3x2) | 88.9x60.3 |
80x65 (3x2-1/2) | 88.9x76.1 |
100x65 (4x2-1/2) | 108x76.1 |
100x80 (4x3) | 108x88.9 |
100x50 (4x2) | 114.3x60.3 |
100x80 (4x3) | 114.3x88.9 |
125x65 (5x2-1/2) | 133x76.1 |
125x100 (5x4) | 133 x 114.3 |
125x50 (5x2) | 139.7x60.3 |
125x100 (5x4) | 139.7x114.3 |
150x65 (6x2-1/2) | 159x76.1 |
150x125 (6x5) | 159x139.7 |
150x50 (6x2) | 165.1x60.3 |
150x125 (6x5) | 165.1x139.7 |
200x65 (8x2) | 219.1x60.3 |
200x150 (8x6) | 219.1x165.1 |
Ọkụ dị arọ
(Emere)
OKWU ỌDỊRỊ (mm/n) | DAYAMETA (mm) Mpụga | ỌRỤ ỌRỤ (MPA) | Akụkụ (MM) | Mba. NKE oghere | |||
A | B | c | D | ||||
65 (2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
100 ⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
100 ⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
150 ⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
150 ⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTER FLANGE
(Emere)
OKWU ỌDỊRỊ (mm/n) | DAYAMETA (mm) Mpụga | ỌRỤ ỌRỤ (MPA) | Akụkụ (MM) | Mba. NKE oghere | |||
A | B | c | D | ||||
50 ⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
65 (2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
100 ⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
100 ⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
150 ⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
150 ⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
FLANGE kpuru ìsì
OKWU ỌDỊRỊ (mm/n) | DAYAMETA (mm) Mpụga | ỌRỤ ỌRỤ (MPA) | Elu (MM) | |
50 ⑵ | 60.3 | 2.5 | 28 | |
65 (2-1/2) | 76.1 | 2.5 | 28 | |
80⑶ | 88.9 | 2.5 | 29 | |
100 ⑷ | 108 | 2.5 | 31 | |
100 ⑷ | 114.3 | 2.5 | 31 | |
125(5) | 133 | 2.5 | 31.5 | |
125⑸ | 139.7 | 2.5 | 31.5 | |
150 ⑹ | 159 | 2.5 | 31.5 | |
150 ⑹ | 165.1 | 2.5 | 31 | |
200⑻ | 219.1 | 2.5 | 36.5 |
Ọkụ THREADED
OKWU ỌDỊRỊ (mm/in) | DAYAMETA (mm) Mpụga | ỌRỤ ỌRỤ (MPA) | Akụkụ (MM) | Mba. NKE oghere | |||
A | B | c | D | ||||
25 ⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
32 (1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
40 (1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
65 (2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
100 ⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOLTS & NUTS
SIZE | Ogologo eriri L1 | Mkpokọta ogologo | MGBE OBODO Azụ̀ | NUT WIDHT |
M10 x55 | 30±3 | 55±1.2 | 14.5±0. 5 | 9. 6-10 |
M10 x 60 | 30±3 | 60± 1.2 | 14.5 + 0,5 | 9. 6-10 |
M10 x 65 | 30±3 | 65± 1.2 | 14.5±0. 5 | 9. 6-10 |
M12 x 65 | 36+4 | 65± 1.2 | 15.2± 0.4 | 11.6-12 |
M12 x 70 | 36+4 | 70+1. 2 | 15.2± 0.4 | 11.6 ~ 12 |
M12 x75 | 41+4 | 75+1. 2 | 15.2± 0.4 | 11.6 ~ 12 |
M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15.3-16 |
M20 x 120 | 50+5 | 120+2. 0 | 24 ± 0.8 | 18.9-20 |
Njirimara akụrụngwa nke bolts agaghị adị ala karịa ọkwa 8.8 akọwapụtara na GB / T 3098.1, na nnabata eri ga-abụ 6G. The n'ibu Njirimara nke aku ga-agbaso na ọkwa 8 chọrọ kpọmkwem maka mkpụrụ na GB / T 3098.2, eri ndidi 6h.
Mgbanaka GASKET
AHA | GASKET | Nkwado ọrụ izugbe | Okpokoro okpomoku |
EPDM | E | Mmiri mmiri, drainage, nsị na ikuku okpomọkụ nkịtị, acid na-adịghị ike na alkali na-adịghị ike | -30C ~ +130C |
NBR | D | Mmanụ ndị sitere na mmanụ ala | -20°C“+80°C |
RUBBER SILICOMN | S | Mmiri ọṅụṅụ, ikuku kpọrọ nkụ na ụfọdụ kemịkalụ ọkụ | -40C ~ +180C |
Agba anụnụ anụnụNgwakọta ọkpọkọ agbadoro
Nha chaatị dị ka n'elu
Ngwakọta ọkpọkọ agbadoro agbaji sliver
Nha chaatị dị ka n'elu