Ang aming pag-unlad ay nakasalalay sa mga advanced na kagamitan, mahuhusay na talento at patuloy na pinalakas na puwersa ng teknolohiya para sa Price Sheet para sa China Manufacturer Tee/Pipe Elbow/Flange HDPE Pipe Fitting na may Butt Fusion Welding/Electrofusion para sa Irrigation/Water Supply/Mining, Lubos naming tinatanggap ang mga mamimili mula sa lahat sa buong mundo upang tiyakin ang matatag at kapwa epektibong mga pakikipag-ugnayan sa negosyo, upang magkaroon ng isang nakasisilaw na katagalan nang magkasama.
Ang aming pag-unlad ay nakasalalay sa mga advanced na kagamitan, mahusay na mga talento at patuloy na pinalakas na puwersa ng teknolohiya para saChina HDPE Fitting, Pipe ng HDPE, Ang aming mga produkto at solusyon ay pangunahing na-export sa timog-silangang Asia Euro-America, at mga benta sa lahat ng ating bansa. At depende sa mahusay na kalidad, makatwirang presyo, pinakamahusay na serbisyo, mayroon na kaming magandang feedback mula sa mga customer sa ibang bansa. Malugod kang tinatanggap na sumali sa amin para sa higit pang mga posibilidad at benepisyo. Tinatanggap namin ang mga customer, asosasyon ng negosyo at mga kaibigan mula sa lahat ng bahagi ng mundo upang makipag-ugnayan sa amin at humingi ng kooperasyon para sa kapwa benepisyo.
Tianjin Youfa International Trade Co., Ltd
Carbon Steel Grooved Fitting
Pamantayan: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 atbp.
Grado ng bakal: GR.A GR.B
Ibabaw: Pininturahan ng Pula o Pininturahan ng Asul o Pininturahan ng Pilak
MECHANICAL CROSS (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 100x50(4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65(4x2-1/2) | 114.3x76. 1 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76. 1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65(6x2-1/2) | 165.1x 76. 1 |
| 150x80(6x3) | 165.1x88.9 |
| 150x100(6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x80(8x3) | 219.1x88.9 |
| 200x100(8x4) | 219.1x114.3 |
MECHANICAL CROSS (THREADED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8x1) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
MECHANICAL TEE (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 100x50(4x2) | 114,3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x100(8x4) | 219.1x114.3 |
MECHANICAL TEE (THREADED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 50x25(2x1) | 60.3xRcl |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65x40(2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25(3x1) | 88.9xRcl |
| 80x50(3x2) | 88.9xRc2 |
| 100x25(4x1) | 108xRcl |
| 100x65(4x2-1/2) | 108xRc2-1/2 |
| 100x25(4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
REDUCING TEE (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 65x50(2/1/2x2) | 76.1x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x50(4x2-1/2) | 108x76.1 |
| 100x50(4x2) | 114.3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x100(5x4) | 133x108 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x100(6x4) | 159x108 |
| 150x125(6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125(6x5) | 165.1x139.7 |
| 200x50(8x2) | 219.1x60.3 |
| 200x150(8x6) | 219.1x165.1 |
TEE (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 50(2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
REDUCING CROSS (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 100x65(4x2-1/2) | 114.3x76 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 165.1x76 |
| 150x125(6x5) | 165.1x139. 7 |
| 200x100(8x4) | 219.1x114.3 |
| 200x150(8x6) | 219.1x165.1 |
KRUS (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° Siko
22.5° Siko
90° Siko
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 50⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUCER (THREADED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 50x20(2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25(2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25(3x1) | 88.9xRcl |
| 80x65(3x2-1/2) | 88.9xRc2-1/2 |
| 100x25(4x1) | 108xRcl |
| 100x25(4x1) | 114.3xRcl |
| 125x25(5x1) | 133xRcl |
| 125x25(5x1) | 139.7xRcl |
| 150x25(6x1) | 159xRcl |
| 150x80(6x3) | 159xRc3 |
| 150x25(6x1) | 165. lxRcl |
| 150x80(6x3) | 165. 1xRc3 |
| 200x25(8xRcl) | 219. lxRcl |
| 200x80(8x3) | 219. 1xRc3 |
REDUCER (GROOVED)
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50(3x2) | 88.9x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x65(4x2-1/2) | 108x76.1 |
| 100x80(4x3) | 108x88.9 |
| 100x50(4x2) | 114.3x60.3 |
| 100x80(4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 133x76.1 |
| 125x100(5x4) | 133x114.3 |
| 125x50(5x2) | 139.7x60.3 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 159x76.1 |
| 150x125(6x5) | 159x139.7 |
| 150x50(6x2) | 165.1x60.3 |
| 150x125(6x5) | 165.1x139.7 |
| 200x65(8x2) | 219.1x60.3 |
| 200x150(8x6) | 219.1x165.1 |
HEAVY DUTY FLANGE
(GROOVED)
| NORMAL SIZE(mm/in) | LABAS DIAMETER(mm) | WORKING PRESSURE(MPA) | MGA DIMENSYON(MM) | HINDI. NG BUTAS | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTER FLANGE
(GROOVED)
| NORMAL SIZE(mm/in) | LABAS DIAMETER(mm) | WORKING PRESSURE(MPA) | MGA DIMENSYON(MM) | HINDI. NG BUTAS | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
| NORMAL SIZE(mm/in) | LABAS DIAMETER(mm) | WORKING PRESSURE(MPA) | HEIGHT(MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65(2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
THREADED FLANGE
| NORMAL SIZE (mm/in) | LABAS DIAMETER(mm) | WORKING PRESSURE(MPA) | MGA DIMENSYON(MM) | HINDI. NG BUTAS | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32(1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40(1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOLTS & NUTS
| SIZE | HABA NG THREADED L1 | KABUUANG HABA | FISHTAIL BOLT WIDTH | NUT WIDHT |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14.5 + 0.5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1. 2 | 15.2±0.4 | 11. 6 ~12 |
| M12 x 75 | 41+4 | 75+1. 2 | 15.2±0.4 | 11. 6 ~12 |
| M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3~16 |
| M20 x 120 | 50+5 | 120+2. 0 | 24±0.8 | 18. 9~20 |
Ang mga mekanikal na katangian ng bolts ay hindi dapat mas mababa sa grade 8.8 na tinukoy sa GB / T 3098.1, at ang thread tolerance ay dapat na 6G. Ang mga mekanikal na katangian ng nut ay dapat sumunod sa Grade 8 na mga kinakailangan na tinukoy para sa mga mani sa GB / T 3098.2, thread tolerance 6h.
singsing ng gasket
| PANGALAN | GASKET | PANGKALAHATANG SERBISYO REKOMENDASYON | TEMPERATURE RANGE |
| EPDM | E | Supply ng tubig, paagusan, dumi sa alkantarilya at normal na temperatura ng hangin, mahinang acid at mahinang alkali | -30°C~+130°C |
| NBR | D | Mga langis na batay sa petrolyo | -20°C〜+80°C |
| SILICOMN RUBBER | S | Pag-inom ng tubig, mainit na tuyong hangin at ilang maiinit na kemikal | -40°C~+180°C |
Pininturahan ng AsulMga Grooved Pipe Fitting
Sukat ng tsart tulad ng nasa itaas
Sliver Painted Grooved Pipe Fittings
Sukat ng tsart tulad ng nasa itaas
Iba pang mga uri ng pipe fitting
Carbon Steel Butt Welded at Seamless Pipe Fitting
Maluwag na Iron Galvanized at Black Fitting
Flange
GUSTO BANG MAGTRABAHO SA AMIN?
-
OEM/ODM Manufacturer Gi Pipe Seamless Pipe Size...
-
Mga Nangungunang Supplier Carbon Erw Iron Hss Structural Re...
-
Malaking Diskwento Bs 1387/en39/en10219 Erw Hot Dip G...
-
Presyo ng Pakyawan China Bs 1387/en39/en10219 Erw ...
-
Magandang Reputasyon ng User para sa Round 3 Inch Galvanize...
-
Discount pakyawan Pipe Steel Galvanized Class ...