Feistis Píobáin Iarainn agus Cruach

Feistis Píobáin Iarainn agus Cruach Íomhá Réadmhaoin
  • Feistis Píobáin Iarainn agus Cruach
  • Feistis Píobáin Iarainn agus Cruach
  • Feistis Píobáin Iarainn agus Cruach

Cur síos gairid:

Is feistis píopaí brú-iompartha iad feistis píopa cruach

CÓD: 73079300


  • MOQ In aghaidh an Méid:2 tonna
  • Min. Cainníocht Ordaithe:Coimeádán amháin
  • Am Táirgthe:de ghnáth 25 lá
  • Port Seachadta:Xingang Tianjin Port sa tSín
  • Téarmaí Íocaíochta:L/C, D/A, D/P, T/T
  • Branda:TÚFA
  • Praghas:FOB CFR CIF
  • Áit Tionscnaimh:tSín
    • Íoslódáil mar PDF

    Sonraí Táirge

    Clibeanna Táirge

    Is féidir na cineálacha feistis píopaí a rangú de réir a n-úsáidí:

    Feistis píopaí a úsáidtear chun píopaí a nascadh: flanges, cúpláin, teanntáin píopa, cúpláin muinchille.
    Feistis píopa a úsáidtear chun treo na bpíopaí a athrú: uillinn, bends.
    Feistis píopa a úsáidtear chun trastomhas na bpíopaí a athrú: laghdaitheoirí (eccentric agus comhlárnacha), ag laghdú uillinn.
    Feistis píopaí a úsáidtear chun brainsí a chur le píblínte: tíonna, crosa.
    Feistis píopa a úsáidtear le haghaidh píblínte ina saothraítear rónta: gaiscéid, flanges dall, caipíní píopa, caipíní dall.

    Butt Cruach Carbóin Táthaithe agus Feistiú Píobáin Gan uaim

    45°, 90° AGUS Elbow CRUACH CARBÓIN 180°

    Caighdeán: ASME/ANSI B16.9 / ASTM A235

    Grád: WPB; WPC

    45° ELBOW

    45° Elbow

    90° ELBOW

    90° Elbow

    180° Elbow

    180° Elbow

    Trastomhas Lasmuigh Tiús Balla
    (mm)    		 Meáchan teoiriciúil
    45° 90° 180°
    INCH MM SCH40 KG KG KG
    1/2 21.3 2.77 0. 04 0. 08 0. 16
    3/4 26.7 2.87 0. 05 0.1 0. 21
    1 33.4 3.38 0. 08 0. 16 0.3
    1 1/4 42.2 3.56 0. 13 0.25 0.5
    1 1/2 48.3 3.68 0. 18 0. 38 0.72
    2 60.3 3. 91 0. 38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5. 49 1. 02 2. 03 4. 06
    3 1/2 101.6 5.74 1.22 2. 45 4.87
    4 114.3 6. 02 1. 93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7. 11 6. 06 10.1 20.2
    8 219.1 8.18 7. 96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    TAE DÍR AGUS LAGHDAITHE

    Caighdeán: ASME/ANSI B16.9 / ASTM A234

    Grád: WPB; WPC

    TEE

    Tee Dhíreach

    REDUCER TEE

    Laghdaitheoir Tee

    Trastomhas Lasmuigh Trastomhas Lasmuigh
    INCH MM INCH MM
    3/4x3/4 26.7×26.7 6x6 168.3×168.3
    3/4x1/2 26.7×21.3 6×5 168.3×141.3
    1×1 33.4×33.4 8×8 219.1×219.1
    1x3/4 33.4×26.7 8×6 219.1×168.3
    1 1/4×1 1/4 42.2×42.2 10×8 273×219.1
    1 1/4x1 42.2×33.4 10×10 273.1×273.1
    1 1/2×1 1/2 48.3×48.3 12×12 323.8×323.8
    1 1/2×1 1/4 48.3*42.2 12×10 323.8×273.1
    2×2 60.3zx60.3 14×14 355.6×355.6
    2x1 1/2 60.3×48.3 14×12 355.6×323.8
    3x3 88.9×88.9 18×18 457×457
    3x2 1/2 88.9×73 18×16 457×406.4
    4x4 114.3×114.3 20×20 508x508
    4x3 114.3×88.9 20×18 508x457
    5x5 141.3×141.3 24×24 610x610
    5x4 141.3×114.3 24×20 610x508

    Laghdaitheoir comhlárnacha agus eccentric

    Caighdeán: ASME/ANSI B16.9 / ASTM A234

    Grád: WPB; WPC

    CON REDUCER

    Laghdaitheoir CON

    ECC REDUCER

    Laghdaitheoir ECC

    Trastomhas Lasmuigh Trastomhas Lasmuigh
    INCH MM INCH MM
    3/4x1/2 26.7×21.3 5x3 141.3×88.9
    1X3/4 33.4X26.7 6×5 168.3×141.3
    1×1/2 33.4×21.3 6x4 168.3×114.3
    1 1/4x1 42.2×33.4 8×6 219.1×168.3
    1 1/4x3/4 42.2×26.7 8x4 219.1×114.3
    1 1/2×1 1/4 48.3*42.2 10×8 273.1×219.1
    1 1/2×1 48.3×33.4 10×6 273.1×168.3
    2x1 1/2 60.3×48.3 12×10 323.9×273.1
    2×1 60.3zx33.4 12×8 323.9×219.1
    2 1/2×2 73×60.3 14×12 355.6×323.8
    2 1/2×1 1/2 73×48.3 14×10 355.6×273.1
    3x2 1/2 88.9×73 18×16 457×406.4
    3x2 88.9×60.3 18×14 457×355.6
    4x3 114.3×88.9 20×18 508x457
    4x2 1/2 114.3×73 24×20 610x508
    5x4 141.3×114.3 24×18 610x457

    Iarann ​​Intuargainte Galbhánaithe agus Feistiú Dubh

    Caighdeán: ENGB/T-3287 ; BS EN-10242; KHT300-6srl.

    Ábhar: Iarann ​​Intuargainte

    Dromchla: Galvanized nó Nádúrtha Dubh

    Dromchla Istigh: Le nó Gan PVC Brataithe

    Tosnú

    MÉID In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10×8 18×8 15×10 20×10 20×15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Tosnú

    Aontas

    MÉID In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    MÉID In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    aontas

    Tee Dhíreach

    MÉID In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    MÉID In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Cúpláil

    MÉID In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    MÉID In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 íoslódáil

    Soicéad a Laghdú

    Méid mm 10×8 15×8 15×10 20×15 25×10 25×15
    In 3/8×1/4 1/2x1/4 1/2x3/8 3/4x1/2 1×3/8 1×1/2
    A 29 35 36 38 44 44
    Méid mm 32×15 32×20 32×25 40×15 40×20 40×25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1½x 3/ 4 1½ x1
    A 49 49 49 53 53 53
    Méid mm 40×32 50×15 50×20 50×25 50×32 50x40
    In 1½x1¼ 2 x1/2 2x3/4 2×1 2×1¼ 2x1½
    A 53 63 63 63 63 63
    Méid mm 65×15 65×20 65×25 65×32 65×40 65×50
    In 2½x1/2 2 ½x3/4 2 1/2×2 2½ x1¼ 2 ½x1½ 2½ x2
    A 72 72 72 72 72 72
    Méid mm 80×15 80×20 80×25 80×32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3×1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Méid mm 80×65 100 x 15 100x20 100×25 100×32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4×1¼ 4x 1½
    A 71 84 84 84 84 84
    Méid mm 100x50 100×65 100x80 25×20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Soicéad a Laghdú

    Ceap ochtagánach

    Méid In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Méid In 2
    mm 50
    A 32
    S 65
    Ceap ochtagánach

    Breiseán Plain

    Méid In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 1 0 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Méid In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    breiseán simplí

    Nipple bairille

    Méid In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Méid In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    teilgthe_iarann_nipple

    90 Elbow

    Méid mé n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Méid In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77.5 96.5 129
    90 uillinn

    45 Elbow

    Méid In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Méid In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 . 5 64 . 5 129
    45 uillinn

    Laghdú Elbow

    Méid In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Méid I 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96.5
    B 65 74 90 100 120
    ag laghdú elbow

    LaghdúTé

    Méid In 1.25×1/2x1 1 1/4x3/4x1 1 1/4×1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2×1x1
    mm 32×15×25 32×20×25 32×25x25 40×15×32 40×20×32 40×25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Méid In 1 1/2×1x1 1/4 1 1/2×1 1/4x1 1 1/2×1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2×1×1 14
    mm 40×25x32 40×32x25 40×32×32 50×15x40 50x20x40 50×25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Méid In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50×32×32 50×32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Méid In 2 1/2×1x2 2x1 1/4x1 1/2 2 1/2×1 1/4x2 2 1/2×1 1/2x2 2 1/2×2x2 3x1x2 1/2
    mm 65×25x50 65×32x40 65×32x50 65x40x50 65x50x50 80×25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Méid In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80×32x65 80x40x65 80×50/65 80x40 x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Laghdú Tee 异径三通

    Feistiú Grooved

    Caighdeán: ANSI B36.10, JIS B2302, ASME / ANSI / BS1560 / DIN2616 etc.

    Grád cruach: GR.A GR.B

    Dromchla: Péinteáilte Dearg nó Gorm Péinteáilte nó Péinteáilte Airgid

    TRAS MEICNIÚCHÁIN (GROOVED)

    cros meicniúil eitrithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    100×50(4×2) 114.3×60.3
    100×65 (4x2-1/2) 114.3×73
    100×65(4x2-1/2) 114.3×76. 1
    100×80(4×3) 114.3×88.9
    125×65(5x2-1/2) 139.7×76. 1
    125×80(5×3) 139.7×88.9
    150×65(6x2-1/2) 165.1×76. 1
    150×80(6×3) 165.1×88.9
    150×100(6×4) 165.1×114.3
    200×65(8x2-1/2) 219.1×76.1
    200×80(8×3) 219.1×88.9
    200×100(8×4) 219.1×114.3

    TRAS MEICNIÚCHÁIN (Snáithithe)

    tras meicniúil snáithithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    50×25(2×1) 60.3xRcl
    65×25(2-1/2x1) 76. lxRcl
    65×40(2-1/2x1-1/2) 76. lxRcl-1/2
    80×25(3×1) 88.9xRcl
    80×50(3×2) 88.9xRc2
    100×25(4×1) 108xRcl
    100×65 (4x2-1/2) 114.3xRc2-1/2
    125×25(5×1) 133xRcl
    125×80(5×3) 133xRc3
    125×25(5×1) 139.7xRcl
    150×25(6×1) 159xRcl
    150×80(6×3) 165. 1xRc3
    200×25(8×1) 219. lxRcl
    200×80(8×3) 219. 1xRc3

    Tee MEICNIÚCHÁIN (GROOVED)

    tee meicniúil eitrithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    100×50(4×2) 114,3×60.3
    100×80(4×3) 114.3×88.9
    125×65(5x2-1/2) 139.7×76.1
    125×80(5×3) 139.7×88.9
    150×65 (6x2-1/2) 165.1×76.1
    150×100 (6x4) 165.1×114.3
    200×65(8x2-1/2) 219.1×76.1
    200×100(8×4) 219.1×114.3

    TEE MEICIÚIL (Snáithithe)

    tee meicniúil snáithithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    50×25(2×1) 60.3xRcl
    65×25(2-1/2x1) 76. lxRcl
    65×40(2-1/2x1-1/2) 76. lxRcl-1/2
    80×25(3×1) 88.9xRcl
    80×50(3×2) 88.9xRc2
    100×25(4×1) 108xRcl
    100×65(4x2-1/2) 108xRc2-1/2
    100×25(4×1) 114.3xRcl
    100×65 (4x2-1/2) 114.3xRc2-1/2
    125×25(5×1) 133xRcl
    125×80(5×3) 133xRc3
    125×25(5×1) 139.7xRcl

    TEE A LAGHDÚ (GROOVED)

    tee laghdaithe eitrithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    65×50(2/1/2×2) 76.1×60.3
    80×65(3x2-1/2) 88.9×76.1
    100×50(4x2-1/2) 108×76.1
    100×50(4×2) 114.3×60.3
    100×80(4×3) 114.3×88.9
    125×100(5x4) 133x108
    125×65(5x2-1/2) 139.7×76.1
    125x100 (5x4) 139.7×114.3
    150×100(6×4) 159×108
    150×125(6×5) 159×133
    150×65 (6x2-1/2) 165.1×76. 1
    150×125(6×5) 165.1×139.7
    200×50(8×2) 219.1×60.3
    200×150(8×6) 219.1×165.1

    TEE (GROOVED)

    tee eitrithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    50(2) 60.3
    65(2-1/2) 76.1
    80(3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150(6) 165.1
    150⑹ 168.3
    200 ⑻ 219.1

    CROIS A LAGHDÚ (GROOVED)

    cros laghdaithe eitrithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    100×65(4x2-1/2) 114.3×76
    100×80(4×3) 114.3×88.9
    125×65(5x2-1/2) 139.7×76
    125×100(5x4) 139.7×114.3
    150×65(6x2-1/2) 165.1×76
    150×125(6×5) 165.1×139. 7
    200×100(8×4) 219.1×114.3
    200×150(8×6) 219.1×165.1

    TRAS (GROOVED)

    cros
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200 ⑻ 219.1

    45° Elbow

    uillinn 45°

    22.5° Elbow

    uillinn 22.5°

    90° Elbow

    uillinn 90°
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200 ⑻ 219.1

    REDUCER (Snáithithe)

    Laghdaitheoir snáithithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    50×20(2x3/4) 60.3xRc3/4
    50×40 (2x1-1/2) 60.3xRcl-1/2
    65×25(2-1/2x1) 76. lxRcl
    65×50 (2-1/2 x 2) 76. 1xRc2
    80×25(3×1) 88.9xRcl
    80×65(3x2-1/2) 88.9xRc2-1/2
    100×25(4×1) 108xRcl
    100×25(4×1) 114.3xRcl
    125×25(5×1) 133xRcl
    125×25(5×1) 139.7xRcl
    150×25(6×1) 159xRcl
    150×80(6×3) 159xRC3
    150×25(6×1) 165. lxRcl
    150×80(6×3) 165. 1xRc3
    200×25(8xRcl) 219. lxRcl
    200×80(8×3) 219. 1xRc3

    REDUCER (GROOVED)

    laghdaitheoir eitrithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm)
    65×50 (2-1/2 x 2) 76.1×60.3
    80×50(3×2) 88.9×60.3
    80×65(3x2-1/2) 88.9×76.1
    100×65(4x2-1/2) 108×76.1
    100×80(4×3) 108×88.9
    100×50(4×2) 114.3×60.3
    100×80(4×3) 114.3×88.9
    125×65(5x2-1/2) 133×76.1
    125×100(5x4) 133×114.3
    125×50(5×2) 139.7×60.3
    125×100(5x4) 139.7×114.3
    150×65(6x2-1/2) 159×76.1
    150×125(6×5) 159×139.7
    150×50(6×2) 165.1×60.3
    150×125(6×5) 165.1×139.7
    200×65(8×2) 219.1×60.3
    200×150(8×6) 219.1×165.1

    FLANG DLEACHT TROM

    (GROOVED)

    flange dualgas trom
    GNÁTHMHÉID(mm/in) Trastomhas Lasmuigh (mm) BRÚ OIBRE(MPA) TOISÍ(MM) NÍL. OF HOLES
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200 ⑻ 219.1 2.5 77 20 360 310 12

    FLANG ADAPTER

    (GROOVED)

    FLANG ADAPTER
    GNÁTHMHÉID(mm/in) Trastomhas Lasmuigh (mm) BRÚ OIBRE(MPA) TOISÍ(MM) NÍL. OF HOLES
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200 ⑻ 219.1 1.6 78 19 340 295 8\12

    AN FLANG DALL

    AN FLANG DALL
    GNÁTHMHÉID(mm/in) Trastomhas Lasmuigh (mm) BRÚ OIBRE(MPA) AIRDE(MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200 ⑻ 219.1 2.5 36.5

    Flange snáithithe

    Flange snáithithe
    GNÁTHMHÉID (mm/in) Trastomhas Lasmuigh (mm) BRÚ OIBRE(MPA) TOISÍ(MM) NÍL. OF HOLES
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32(1-1/4) Rcl- 1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl- 1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    Boltaí & Cnónna

    boltaí agus cnónna
    MÉID FAD Snáithithe L1 FAD IOMLÁN Leithead BOLT FISHTAIL NUT WIDHT
    M10 x 55 30±3 55±1.2 14. 5±0. 5 9. 6~10
    M10x60 30±3 60±1.2 14.5 + 0.5 9. 6~10
    M10 x 65 30±3 65±1.2 14. 5±0. 5 9. 6~10
    M12 x 65 36+4 65±1.2 15.2±0.4 11. 6~12
    M12x70 36+4 70+1. 2 15.2±0.4 11. 6 ~12
    M12 x 75 41+4 75+1. 2 15.2±0.4 11. 6 ~12
    M16×85 44+4 85+1. 2 19. 0-19. 9 15. 3~16
    M20 x 120 50+5 120+2. 0 24±0.8 18. 9~20

    Ní bheidh airíonna meicniúla boltaí níos ísle ná grád 8.8 atá sonraithe i GB / T 3098.1, agus beidh an lamháltas snáithe 6G. Comhlíonfaidh airíonna meicniúla an chnó ceanglais Ghrád 8 a shonraítear le haghaidh cnónna i GB / T 3098.2, caoinfhulaingt snáithe 6h.

    Fáinne GASCET

    fáinne gasket
    AINM GASCET MOLADH SEIRBHÍSE GINEARÁLTA RAON TEMPERATURE
    EPDM E Soláthar uisce, draenáil, séarachas agus aer teocht gnáth, aigéad lag agus alcaile lag -30°C~+130°C
    NBR D Olaí peitriliam atá bunaithe -20°C〜+80°C
    RUBAIR SILICOMN S Uisce óil, aer tirim te agus roinnt ceimiceán te -40°C~+180°C

    flange

    FLANGE Muineál Táthú

    Caighdeán: ASME/ANSI B16.9 Grád: WPB

    flange ingne táthaithe
    NPS OD ID Tiús Meáchan Aonaid
    orlach mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    AN FLANG DALL

    Caighdeán: ASME/ANSI B16.9 Grád: WPB

    flange dall
    NPS OD ID Tiús meáchan aonad
    orlach mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    SLIP AR FLANGE

    Caighdeán: ASME/ANSI B16.9 Grád: WPB

    duillín ar flange
    NPS OD ID Tiús meáchan aonad
    orlach mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    Flange snáithithe

    Caighdeán: ASME/ANSI B16.9 Grád: WPB

    flange snáithithe
    NPS OD ID Tiús meáchan aonad
    orlach mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    AR FHÁIL OIBRIÚ LINN?

    TEAGMHÁIL LINN
  • Roimhe Seo:
  • Ar Aghaidh:

    • TÁIRGÍ GAOLMHARA

    Buail isteach chun cuardach a dhéanamh nó ESC a dhúnadh