Abubuwan Bututun ƙarfe da ƙarfe

Hotunan Ƙarfe da Ƙarfe Mai Ƙarfafawa
  • Abubuwan Bututun ƙarfe da ƙarfe
  • Abubuwan Bututun ƙarfe da ƙarfe
  • Abubuwan Bututun ƙarfe da ƙarfe

Takaitaccen Bayani:

Kayan aikin bututun ƙarfe duk kayan aikin bututu ne masu ɗaukar matsi

Lambar HS: 73079300


  • MOQ Kowane Girma:2 ton
  • Min. Yawan oda:Kwantena daya
  • Lokacin samarwa:yawanci kwanaki 25
  • tashar isar da saƙo:Tashar jiragen ruwa ta Xingang Tianjin dake kasar Sin
  • Sharuɗɗan Biyan kuɗi:L/C,D/A,D/P,T/T
  • Alamar:YOUFA
  • Farashin:Farashin CFR
  • Wurin Asalin:China
    • Zazzage azaman PDF

    Cikakken Bayani

    Tags samfurin

    Ana iya rarraba nau'ikan kayan aikin bututu bisa ga amfanin su:

    Abubuwan da ake amfani da su don haɗa bututu: flanges, couplings, clamps na bututu, haɗin hannu.
    Ana amfani da kayan aikin bututu don canza alkiblar bututu: gwiwar hannu, lanƙwasa.
    Ana amfani da kayan aikin bututu don canza diamita na bututu: masu ragewa (eccentric da concentric), rage gwiwar hannu.
    Ana amfani da kayan aikin bututu don ƙara rassan zuwa bututun: tees, crosses.
    Kayan aikin bututu da ake amfani da su don rufe bututun: gaskets, flanges makafi, hulunan bututu, iyalai.

    Carbon Karfe Butt Weld da Bututu mara kyau

    45°,90°DA 180°CARBAN KURFIN GINDI

    Standard: ASME/ANSI B16.9 / ASTM A235

    Darasi: WPB; WPC

    45°GINDI

    45 ° Gishiri

    90° GIDANCI

    90 ° Gishiri

    180 ° Gishiri

    180 ° Gishiri

    Waje Diamita Kaurin bango
    (mm)    		 Nauyin Ka'idar
    45° 90° 180°
    INCH MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    Madaidaici DA RAGE Tee

    Standard: ASME/ANSI B16.9 / ASTM A234

    Darasi: WPB; WPC

    TEE

    Madaidaicin Tee

    RAGE TEE

    Mai Rage Tee

    Waje Diamita Waje Diamita
    INCH MM INCH MM
    3/4x3/4 26.7x26.7 6 x6 168.3x168.3
    3/4x1/2 26.7x21.3 6 x5 168.3x141.3
    1 x1 33.4x33.4 8 x8 219.1x219.1
    1 x3/4 33.4x26.7 8 x6 219.1x168.3
    1 1/4 x 1 1/4 42.2x42.2 10 x8 273x219.1
    1 1/4x1 42.2x33.4 10 x10 273.1x273.1
    1 1/2 x 1 1/2 48.3x48.3 12 x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2 x2 60.3zx60.3 14 x14 355.6x355.6
    2 x1 1/2 60.3x48.3 14 x12 355.6x323.8
    3 x3 88.9x88.9 18 x18 457x457
    3 x2 1/2 88.9x73 18 x16 457x406.4
    4 x4 114.3x114.3 20 x20 508x508 ku
    4 x3 114.3x88.9 20 x18 508x457
    5x5 ku 141.3x141.3 24 x24 610x610
    5x4 ku 141.3x114.3 24x20 610x508

    TSOKACI DA MAI RAGE ECCENTRIC

    Standard: ASME/ANSI B16.9 / ASTM A234

    Darasi: WPB; WPC

    MAI RAGE CUTAR

    Mai Rage CON

    ECC REDUCER

    Mai Rage ECC

    Waje Diamita Waje Diamita
    INCH MM INCH MM
    3/4x1/2 26.7x21.3 5x3 ku 141.3x88.9
    1 x3/4 33.4X26.7 6 x5 168.3x141.3
    1 x1/2 33.4x21.3 6x4 ku 168.3x114.3
    1 1/4x1 42.2x33.4 8 x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 ku 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10 x8 273.1x219.1
    1 1/2x1 48.3x33.4 10 x6 273.1x168.3
    2 x1 1/2 60.3x48.3 12x10 323.9x273.1
    2 x1 60.3zx33.4 12 x8 323.9x219.1
    2 1/2 x2 73x60.3 14 x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3 x2 1/2 88.9x73 18 x16 457x406.4
    3 x2 88.9x60.3 18 x14 457x355.6
    4 x3 114.3x88.9 20 x18 508x457
    4 x2 1/2 114.3x73 24x20 610x508
    5x4 ku 141.3x114.3 24x18 610x457

    Iron Galvanized da Baƙin Fitting

    Standard: ENGB/T-3287 ; TS EN-10242; KTT300-6da dai sauransu.

    Abu: Ƙarfe mai yuwuwa

    Surface: Galvanized ko Baƙi na Halitta

    Inner Surface: Tare da ko Ba tare da Rufin PVC ba

    Bushing

    GIRMA In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10 x8 18 x8 15 x10 20 x10 20 x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Ƙungiyar

    GIRMA In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    GIRMA In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    ƙungiyar

    Madaidaicin Tee

    GIRMA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    GIRMA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Haɗin kai

    GIRMA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    GIRMA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    Bayanan Bayani na DSC00026

    Rage Socket

    Girman mm 10 x8 15 x8 15 x10 20 x15 25x10 25 x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1 x3/8 1 x1/2
    A 29 35 36 38 44 44
    Girman mm 32x15 32x20 32x25 40x15 40x20 40 x25
    In 1¼x1/2 1¼x3/4 1 ¼ x1 1½ x1/2 1 ½ x 3/4 1½ x1
    A 49 49 49 53 53 53
    Girman mm 40x32 50x15 50x20 50 x25 50x32 50x40
    In 1½x1¼ 2 x1/2 2 x3/4 2 x1 2 x1¼ 2 x1½
    A 53 63 63 63 63 63
    Girman mm 65x15 65 x20 65x25 65x32 65x40 65x50
    In 2½ x1/2 2 ½ x3/4 2 1/2 x2 2½ x1¼ 2 ½x1½ 2 ½ x2
    A 72 72 72 72 72 72
    Girman mm 80x15 ku 80x20 ku 80x25 ku 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3 x1 3 x1¼ 3 x1½ 3 x2
    A 71 71 71 71 71 71
    Girman mm 80x65 100 x15 100x20 100 x25 100x32 100x40
    In 3 x2½ 4 x1/2 4 x3/4 4x1 ku 4 x1¼ 4 x1½
    A 71 84 84 84 84 84
    Girman mm 100x50 100x65 ku 100x80 25x20
    In 4 x2 4 x2½ 4 x3 1 x3/4
    A 84 84 84 44
    Rage Socket

    Octagonal Cap

    Girman In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Girman In 2
    mm 50
    A 32
    S 65
    Octagonal Cap

    Filayen Filogi

    Girman In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 10 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Girman In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    fili toshe

    Nonon ganga

    Girman In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Girman In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    jefa_iron_nono

    90 Hannun hannu

    Girman Ina n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    Girman In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    90 gwiwar hannu

    45 Hannun hannu

    Girman In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Girman In 2½ 3 4 6
    mm 65 80 100 150
    A 48.5 53 . 5 64 . 5 129
    45 gwiwar hannu

    Rage gwiwar gwiwar hannu

    Girman In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Girman A ciki 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77.5 96.5
    B 65 74 90 100 120
    rage gwiwar hannu

    RagewaTee

    Girman In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Girman In 1 1/2 x 1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2 x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Girman In 2 x1 x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2 x1 1/2 x 1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Girman In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2 x2 3 x1 x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 ku 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Girman In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3 x2 x2 1/2 3 x2 1/2 x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Rage Tee 异径三通

    Tsarukan Daidaitawa

    Standard: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 da dai sauransu.

    Karfe darajar: GR.A GR.B

    Sama: Fentin Ja ko shuɗi ko Zalin Azurfa

    CIGABAN injina (GROVED)

    tsagi na inji giciye
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    100x50 (4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65 (4x2-1/2) 114.3x76. 1
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76. 1
    125x80(5x3) 139.7x88.9
    150x65(6x2-1/2) 165.1x 76. 1
    150x80 (6x3) 165.1x88.9
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x80 (8x3) 219.1x88.9
    200x100 (8x4) 219.1x114.3

    CIN JINI (THREADED)

    threaded inji giciye
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xcl
    80x50 (3x2) 88.9xRc2
    100x25 (4x1) 108xrcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xrcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159x rcl
    150x80 (6x3) 165.1 xRc3
    200x25(8x1) 219. lxRcl
    200x80 (8x3) 219. 1 xRc3

    MECHANICAL TEE (GRUVED)

    tsagi inji Tee
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    100x50 (4x2) 114,3x60.3
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x100 (8x4) 219.1x114.3

    MECHANICAL TEEE (THREADED)

    threaded inji Tee
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xcl
    80x50 (3x2) 88.9xRc2
    100x25 (4x1) 108xrcl
    100x65 (4x2-1/2) 108xRC2-1/2
    100x25 (4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xrcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    RAGE TEE (GRUVED)

    tsagi rage tee
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    65x50 (2/1/2x2) 76.1x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x50 (4x2-1/2) 108x76.1
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x100 (5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100 (6x4) 159x108
    150x125(6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76. 1
    150x125(6x5) 165.1x139.7
    200x50 (8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    TEE (GRUVED)

    katon tee
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    50(2) 60.3
    65 (2-1/2) 76.1
    80(3) 88.9
    100 ⑷ 108
    100 ⑷ 114.3
    125(5) 133
    125(5) 139.7
    150 ⑹ 159
    150(6) 165.1
    150 ⑹ 168.3
    200 ⑻ 219.1

    RAGE CIN GINDI (TSARA)

    tsagi rage giciye
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    100x65 (4x2-1/2) 114.3x76
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100 (5x4) 139.7x114.3
    150x65(6x2-1/2) 165.1x76
    150x125(6x5) 165.1x139. 7
    200x100 (8x4) 219.1x114.3
    200x150(8x6) 219.1x165.1

    CIN GINDI (GROWA)

    giciye
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    65 (2-1/2) 76.1
    80 ⑶ 88.9
    100 ⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200 ⑻ 219.1

    45° gwiwar hannu

    45° gwiwar hannu

    22.5° gwiwar hannu

    22.5° gwiwar hannu

    90° gwiwar hannu

    90° gwiwar hannu
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    50 ⑵ 60.3
    65 (2-1/2) 76.1
    80 ⑶ 88.9
    100 ⑷ 108
    100 ⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150 ⑹ 159
    150 ⑹ 165
    200 ⑻ 219.1

    MAI RAGE (THREADED)

    Rage zaren
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    50x20 (2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25(2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76.1 xRc2
    80x25(3x1) 88.9xcl
    80x65(3x2-1/2) 88.9xRc2-1/2
    100x25 (4x1) 108xrcl
    100x25 (4x1) 114.3xRcl
    125x25(5x1) 133xrcl
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159x rcl
    150x80 (6x3) 159xrc3
    150x25(6x1) 165. lxRcl
    150x80 (6x3) 165.1 xRc3
    200x25(8xRcl) 219. lxRcl
    200x80 (8x3) 219. 1 xRc3

    MAI RAGE (GRUVE)

    tsagi mai ragewa
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50 (3x2) 88.9x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x65 (4x2-1/2) 108x76.1
    100x80 (4x3) 108x88.9
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100 (5x4) 133x114.3
    125x50(5x2) 139.7x60.3
    125x100 (5x4) 139.7x114.3
    150x65(6x2-1/2) 159x76.1
    150x125(6x5) 159x139.7
    150x50(6x2) 165.1x60.3
    150x125(6x5) 165.1x139.7
    200x65(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    FALATA MAI KYAU

    (GIRMA)

    flange mai nauyi
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm) MATSALAR AIKI(MPA) GIRKI (MM) A'A. NA ramuka
    A B c D
    65 (2-1/2) 76.1 2.5 63.5 17 185 145 8
    65 ⑶ 88.9 2.5 63.5 17 200 160 8
    100 ⑷ 108 2.5 67.5 16.5 235 190 8
    100 ⑷ 114.3 2.5 68 15 230 190 8
    150 ⑹ 159 2.5 68 17 300 250 8
    150 ⑹ 165.1 2.5 68 17 300 250 8
    200 ⑻ 219.1 2.5 77 20 360 310 12

    ADAPTER FLANGE

    (GIRMA)

    ADAPTER FLANGE
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm) MATSALAR AIKI(MPA) GIRKI (MM) A'A. NA ramuka
    A B c D
    50 ⑵ 60.3 1.6 50 15 160 125 4
    65 (2-1/2) 76.1 1.6 50 15 178 145 4
    80 ⑶ 88.9 1.6 50 15 194 160 8
    100 ⑷ 108 1.6 55 15 213 180 8
    100 ⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150 ⑹ 159 1.6 65 17 280 240 8
    150 ⑹ 165.1 1.6 65 17 280 240 8
    200 ⑻ 219.1 1.6 78 19 340 295 8\12

    TURAN MAKARANTA

    TURAN MAKARANTA
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm) MATSALAR AIKI(MPA) TSAYI(MM)
    50 ⑵ 60.3 2.5 28
    65 (2-1/2) 76.1 2.5 28
    80 ⑶ 88.9 2.5 29
    100 ⑷ 108 2.5 31
    100 ⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150 ⑹ 159 2.5 31.5
    150 ⑹ 165.1 2.5 31
    200 ⑻ 219.1 2.5 36.5

    TUTAR ZARE

    TUTAR ZARE
    GIRMAN AL'ADA (mm/in) WAJEN DIAMETAR(mm) MATSALAR AIKI(MPA) GIRKI (MM) A'A. NA ramuka
    A B c D
    25 ⑴ Rcl 1.6 18 10 85 110 4
    32 (1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40 (1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65 (2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80 ⑶ Rc3 1.6 25.5 15 160 193.5 8
    100 ⑷ Rc4 1.6 25.75 15 180 213.5 8

    BOLTS & GYARA

    kusoshi da goro
    GIRMA TSORON L1 JAMA'AR TSAYIN FARIN KIFI NUT WIDHT
    M10 x55 30± 3 55± 1.2 14.5 ± 0. 5 9.6-10
    M10 x60 30± 3 60± 1.2 14.5 + 0.5 9.6-10
    M10 x65 30± 3 65± 1.2 14.5 ± 0. 5 9.6-10
    M12 x65 36+4 65± 1.2 15.2 ± 0.4 11.6-12
    M12 x70 36+4 70+1. 2 15.2 ± 0.4 11.6 ~12
    M12 x75 41+4 75+1. 2 15.2 ± 0.4 11.6 ~12
    M16 x85 44+4 85+1. 2 19.0-19. 9 15. 3 ~ 16
    M20 x 120 50+5 120+2. 0 24 ± 0.8 18.9-20

    The inji Properties na kusoshi ba zai zama ƙasa da sa 8.8 kayyade a GB / T 3098.1, da zaren haƙuri zai zama 6G. The inji Properties na goro za su bi Grade 8 bukatun kayyade domin kwayoyi a GB / T 3098.2, thread haƙuri 6h.

    RINGAN GASKET

    zoben gasket
    SUNAN GASKIYA BAYANIN BAYANIN HIDIMAR MATSAYIN ZAFIN
    EPDM E Samar da ruwa, magudanar ruwa, najasa da iska mai zafi na al'ada, raunin acid da raunin alkaline -30°C ~ +130°C
    NBR D Mai tushen mai -20°C ~+80°C
    RUBBER SILICOMN S Ruwan sha, bushewar iska mai zafi da wasu sinadarai masu zafi -40°C ~ +180°C

    Flange

    WELDING NECK FLANGE

    Matsayi: ASME/ANSI B16.9 Daraja: WPB

    welded wuyan hannu flange
    NPS OD ID Kauri Nauyin Raka'a
    inci mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    TURAN MAKARANTA

    Matsayi: ASME/ANSI B16.9 Daraja: WPB

    makafi flange
    NPS OD ID Kauri nauyin naúrar
    inci mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    ZUCIYA AKAN TUTAR

    Matsayi: ASME/ANSI B16.9 Daraja: WPB

    zamewa a kan flange
    NPS OD ID Kauri nauyin naúrar
    inci mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    TUTAR ZARE

    Matsayi: ASME/ANSI B16.9 Daraja: WPB

    zaren flange
    NPS OD ID Kauri nauyin naúrar
    inci mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    ANA SON AIKI DA MU?

    TUNTUBE MU
  • Na baya:
  • Na gaba:

    • Kayayyakin da suka danganci

    Danna shiga don bincika ko ESC don rufewa