Devlopman nou an depann sou ekipman avanse, talan ekselan ak fòs teknoloji kontinyèlman ranfòse pou fèy pri pou Lachin manifakti Tee/tiyo koud/bride HDPE tiyo Fitting ak Butt Fusion Welding/Electrofusion pou Irigasyon/Dlo Pwovizyon pou/Min, Nou konplètman akeyi achtè soti nan tout atravè mond lan rann kont entèraksyon antrepwiz ki estab ak mityèlman efikas, yo gen yon éblouissant long kouri ansanm.
Devlopman nou depann de ekipman avanse, talan ekselan ak fòs teknoloji kontinyèlman ranfòse pouLachin HDPE Fitting, HDPE tiyo, Pwodwi nou yo ak solisyon yo te sitou ekspòte nan sid-bò solèy leve Azi Euro-Amerik, ak lavant nan tout peyi nou an. Epi tou depann de bon jan kalite ekselan, pri rezonab, pi bon sèvis, kounye a nou gen bon fidbak nan men kliyan lòt bò dlo. Ou ap akeyi yo rantre nan nou pou plis posiblite ak benefis. Nou akeyi kliyan, asosyasyon biznis ak zanmi ki soti nan tout pati nan mond lan kontakte nou epi chèche koperasyon pou benefis mityèl.
Tianjin Youfa komès entènasyonal co, Ltd
Kabòn Steel Groove Fitting
Estanda: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 elatriye.
Steel klas: GR.A GR.B
Sifas: Wouj pentire oswa ble pentire oswa ajan pentire
KWA MEKANIK (GROOUD)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 100x50 (4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65 (4x2-1/2) | 114.3x76. 1 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76. 1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x80 (6x3) | 165.1x88.9 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x80 (8x3) | 219.1x88.9 |
| 200x100 (8x4) | 219.1x114.3 |
KWA MEKANIK (FILES)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8x1) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
MEKANIKA TEE (GROOVE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 100x50 (4x2) | 114,3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80(5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65 (8x2-1/2) | 219.1x76.1 |
| 200x100 (8x4) | 219.1x114.3 |
MEKANIKA TEE (FILES)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 108xRc2-1/2 |
| 100x25 (4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25(5x1) | 133xRcl |
| 125x80(5x3) | 133xRc3 |
| 125x25(5x1) | 139.7xRcl |
REDUCTION TEE (GROOVE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 65x50 (2/1/2x2) | 76.1x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x100(5x4) | 133x108 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x100 (6x4) | 159x108 |
| 150x125(6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125(6x5) | 165.1x139.7 |
| 200x50 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
TEE (GROOVE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 50(2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80(3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
KWA REDUCTION (GROOVE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 100x65 (4x2-1/2) | 114.3x76 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65 (6x2-1/2) | 165.1x76 |
| 150x125(6x5) | 165.1x139. 7 |
| 200x100 (8x4) | 219.1x114.3 |
| 200x150 (8x6) | 219.1x165.1 |
KWA (GROOVE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° koud
22.5° koud
90° koud
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 50⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUSÈ (FILES)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25 (3x1) | 88.9xRcl |
| 80x65 (3x2-1/2) | 88.9xRc2-1/2 |
| 100x25 (4x1) | 108xRcl |
| 100x25 (4x1) | 114.3xRcl |
| 125x25(5x1) | 133xRcl |
| 125x25(5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 159xRc3 |
| 150x25 (6x1) | 165. lxRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8xRcl) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
REDUSÈ (GROOU)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50 (3x2) | 88.9x60.3 |
| 80x65 (3x2-1/2) | 88.9x76.1 |
| 100x65 (4x2-1/2) | 108x76.1 |
| 100x80 (4x3) | 108x88.9 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 133x76.1 |
| 125x100(5x4) | 133x114.3 |
| 125x50 (5x2) | 139.7x60.3 |
| 125x100(5x4) | 139.7x114.3 |
| 150x65 (6x2-1/2) | 159x76.1 |
| 150x125(6x5) | 159x139.7 |
| 150x50 (6x2) | 165.1x60.3 |
| 150x125(6x5) | 165.1x139.7 |
| 200x65 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
BRIDE LOU
(GROUSE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) | PRESYON TRAVAY (MPA) | DIMANSYON (MM) | NON. NAN TROU | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTATE FLANGE
(GROUSE)
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) | PRESYON TRAVAY (MPA) | DIMANSYON (MM) | NON. NAN TROU | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) | PRESYON TRAVAY (MPA) | WÒTÈ (MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65(2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
THREADED FLANGE
| GWO NORMAL (mm/pous) | DYAMET DEYÒ (mm) | PRESYON TRAVAY (MPA) | DIMANSYON (MM) | NON. NAN TROU | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32(1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40(1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOULON & NWA
| SIZE | LONGÈ THREADED L1 | LONGÈ TOTAL | LAJÈ BOLT QUAIL POSON | LAJÈ NWA |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6 ~ 10 |
| M10 x 60 | 30±3 | 60±1.2 | 14.5 + 0.5 | 9. 6 ~ 10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6 ~ 10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6 ~ 12 |
| M12 x 70 | 36+4 | 70+1. 2 | 15.2±0.4 | 11. 6 ~ 12 |
| M12 x 75 | 41+4 | 75+1. 2 | 15.2±0.4 | 11. 6 ~ 12 |
| M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3 ~ 16 |
| M20 x 120 | 50+5 | 120+2. 0 | 24±0.8 | 18. 9 ~ 20 |
Pwopriyete mekanik boulon yo pa dwe pi ba pase klas 8.8 espesifye nan GB / T 3098.1, ak tolerans fil la dwe 6G. Pwopriyete mekanik nwa a dwe konfòme yo ak kondisyon Klas 8 espesifye pou nwa nan GB / T 3098.2, tolerans fil 6h.
BAG JOINT
| NON | GASKET | REKÒMANDASYON SÈVIS JENERAL | RANJE TANPERATI |
| EPDM | E | Ekipman pou dlo, drenaj, dlo egou ak lè tanperati nòmal, asid fèb ak alkali fèb | -30 ° C ~ + 130 ° C |
| NBR | D | Lwil ki baze sou petwòl | -20°C〜+80°C |
| SILICOMN RAWBER | S | Dlo pou bwè, lè cho sèk ak kèk pwodwi chimik cho | -40 ° C ~ + 180 ° C |
Blue PentireGroove tiyo Fittings
Tablo gwosè tankou pi wo a
Sliver pentire Grooved tiyo Fittings
Tablo gwosè tankou pi wo a
