Iron ak Steel tiyo Fittings

Iron ak Steel tiyo Fittings Imaj
  • Iron ak Steel tiyo Fittings
  • Iron ak Steel tiyo Fittings
  • Iron ak Steel tiyo Fittings

Deskripsyon kout:

Fitting tiyo asye yo tout ekipman tiyo presyon-pote

HS KÒD: 73079300


  • MOQ pou chak gwosè:2 tòn
  • Min. Kantite lòd:Yon veso
  • Tan pwodiksyon:anjeneral 25 jou
  • Pò livrezon:Xingang Tianjin Port nan Lachin
  • Kondisyon Peman:L/C,D/A,D/P,T/T
  • Mak:YOUFA
  • Pri:FOB CFR CIF
  • Kote orijin:Lachin
    • Telechaje kòm PDF

    Pwodwi detay

    Tags pwodwi

    Kalite ekipman tiyo yo ka klase dapre itilizasyon yo:

    Fittings tiyo yo itilize pou konekte tiyo: bride, kouple, kranpon tiyo, kouple manch.
    Fittings tiyo yo itilize pou chanje direksyon tiyo: koud, viraj.
    Fittings tiyo yo itilize pou chanje dyamèt tiyo: redukteur (eksantrik ak konsantrik), diminye koud yo.
    Fittings tiyo yo itilize pou ajoute branch nan tiyo: tees, kwaze.
    Fittings tiyo yo itilize pou sele tiyo: garnitur, bride avèg, bouchon tiyo, bouchon avèg.

    Kabòn Steel Bou soude ak Fitting tiyo san pwoblèm

    45°，90°AK 180°KÒD STEEL COUD

    Estanda: ASME/ANSI B16.9 / ASTM A235

    Klas: WPB; WPC

    45°KOUD

    45° koud

    90°KOUD

    90 ° koud

    180 ° koud

    180 ° koud

    Dyamèt deyò Epesè miray la
    (mm)    		 Pwa teyorik
    45° 90° 180°
    POUS MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    TEE DWA AK REDUCER

    Estanda: ASME/ANSI B16.9 / ASTM A234

    Klas: WPB; WPC

    TEE

    Dwat Tee

    REDUCER TEE

    Larsen Tee

    Dyamèt deyò Dyamèt deyò
    POUS MM POUS MM
    3/4x3/4 26.7x26.7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 219.1x219.1
    1x3/4 33.4x26.7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3zx60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    KONSANTRI AK EXCANTRIC REDUCER

    Estanda: ASME/ANSI B16.9 / ASTM A234

    Klas: WPB; WPC

    KON REDUCER

    KON redukteur

    ECC REDUCER

    ECC Larsen

    Dyamèt deyò Dyamèt deyò
    POUS MM POUS MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33.4X26.7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Malleable Iron galvanize ak Nwa Fitting

    Estanda: ENGB/T-3287; BS EN-10242; KHT300-6elatriye.

    Materyèl: fè pèrmeabl

    Sifas: galvanize oswa natirèl nwa

    Sifas enteryè: Avèk oswa san PVC kouvwi

    Bushing

    SIZE In 3/8 * 1/4 1/2 * 1/4 1/2*3/8 3/4 * 3/8 3/4 * 1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Inyon

    SIZE In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    SIZE In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    sendika

    Dwat Tee

    SIZE In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    SIZE In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Couplage

    SIZE In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    SIZE In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Diminye Socket

    Gwosè mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Gwosè mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1 ½x 3/4 1½ x1
    A 49 49 49 53 53 53
    Gwosè mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Gwosè mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½x3/4 2 1/2x2 2½ x1¼ 2 ½x1½ 2 ½ x2
    A 72 72 72 72 72 72
    Gwosè mm 80x15 80x 20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Gwosè mm 80x65 100 x 15 100x20 100 x 25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Gwosè mm 100x50 100x65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Diminye Socket

    Oktogonal Cap

    Gwosè In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Gwosè In 2
    mm 50
    A 32
    S 65
    Oktogonal Cap

    Ploge Plain

    Gwosè In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 10 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Gwosè In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    plenn ploge

    Pwen tete barik

    Gwosè In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Gwosè In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    pwent tete

    90 koud

    Gwosè mwen n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Gwosè In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 100 150
    A 48 .5 57 68 .5 77.5 96.5 129
    90 koud

    45 Koud

    Gwosè In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Gwosè In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 . 5 64 . 5 129
    45 koud

    Diminye koud

    Gwosè In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Gwosè Nan 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96.5
    B 65 74 90 100 120
    diminye koud

    DiminyeTee

    Gwosè In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Gwosè In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Gwosè In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Gwosè In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Gwosè In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40 x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Diminye Tee 异径三通

    Groove Fitting

    Estanda: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 elatriye.

    Steel klas: GR.A GR.B

    Sifas: Wouj pentire oswa ble pentire oswa ajan pentire

    KWA MEKANIK (GROOUD)

    rainure kwa mekanik
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    100x50 (4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65 (4x2-1/2) 114.3x76. 1
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76. 1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x 76. 1
    150x80 (6x3) 165.1x88.9
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x80 (8x3) 219.1x88.9
    200x100 (8x4) 219.1x114.3

    KWA MEKANIK (FILES)

    threaded kwa mekanik
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    50x25 (2x1) 60.3xRcl
    65x25 (2-1/2x1) 76. lxRcl
    65x40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88.9xRcl
    80x50 (3x2) 88.9xRc2
    100x25 (4x1) 108xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25 (6x1) 159xRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8x1) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    MEKANIKA TEE (GROOVE)

    grooved tee mekanik
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    100x50 (4x2) 114,3x60.3
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x100 (8x4) 219.1x114.3

    TEE MEKANIKA (FIL)

    Threaded mekanik tee
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    50x25 (2x1) 60.3xRcl
    65x25 (2-1/2x1) 76. lxRcl
    65x40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88.9xRcl
    80x50 (3x2) 88.9xRc2
    100x25 (4x1) 108xRcl
    100x65 (4x2-1/2) 108xRc2-1/2
    100x25 (4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    REDUCTION TEE (GROOVE)

    rainure diminye tee
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    65x50 (2/1/2x2) 76.1x60.3
    80x65 (3x2-1/2) 88.9x76.1
    100x50 (4x2-1/2) 108x76.1
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x100 (5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100 (6x4) 159x108
    150x125(6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76. 1
    150x125(6x5) 165.1x139.7
    200x50 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    TEE (GROOVE)

    Tee groove
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    50(2) 60.3
    65(2-1/2) 76.1
    80(3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150(6) 165.1
    150⑹ 168.3
    200⑻ 219.1

    KWA REDUCTION (GROOVE)

    rainure diminye kwa
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    100x65 (4x2-1/2) 114.3x76
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100 (5x4) 139.7x114.3
    150x65 (6x2-1/2) 165.1x76
    150x125(6x5) 165.1x139. 7
    200x100 (8x4) 219.1x114.3
    200x150 (8x6) 219.1x165.1

    KWA (GROOVE)

    kwa
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200⑻ 219.1

    45° koud

    45° koud

    22.5° koud

    22.5° koud

    90° koud

    90° koud
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    REDUSÈ (FILES)

    Threaded redukteur
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    50x20 (2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25 (2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25 (3x1) 88.9xRcl
    80x65 (3x2-1/2) 88.9xRc2-1/2
    100x25 (4x1) 108xRcl
    100x25 (4x1) 114.3xRcl
    125x25(5x1) 133xRcl
    125x25(5x1) 139.7xRcl
    150x25 (6x1) 159xRcl
    150x80 (6x3) 159xRc3
    150x25 (6x1) 165. lxRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8xRcl) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    REDUSÈ (GROOU)

    redukteur groove
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50 (3x2) 88.9x60.3
    80x65 (3x2-1/2) 88.9x76.1
    100x65 (4x2-1/2) 108x76.1
    100x80 (4x3) 108x88.9
    100x50 (4x2) 114.3x60.3
    100x80 (4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100 (5x4) 133x114.3
    125x50 (5x2) 139.7x60.3
    125x100 (5x4) 139.7x114.3
    150x65 (6x2-1/2) 159x76.1
    150x125(6x5) 159x139.7
    150x50 (6x2) 165.1x60.3
    150x125(6x5) 165.1x139.7
    200x65 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    BRIDE LOU

    (GROUSE)

    bride lou
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm) PRESYON TRAVAY (MPA) DIMANSYON (MM) NON. NAN TROU
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    ADAPTATE FLANGE

    (GROUSE)

    ADAPTATE FLANGE
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm) PRESYON TRAVAY (MPA) DIMANSYON (MM) NON. NAN TROU
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 8\12

    BLIND FLANGE

    BLIND FLANGE
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm) PRESYON TRAVAY (MPA) WÒTÈ (MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36.5

    THREADED FLANGE

    THREADED FLANGE
    GWO NORMAL (mm/pous) DYAMET DEYÒ (mm) PRESYON TRAVAY (MPA) DIMANSYON (MM) NON. NAN TROU
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32(1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    BOULON & NWA

    boulon ak nwa
    SIZE LONGÈ THREADED L1 LONGÈ TOTAL LAJÈ BOLT QUAIL POSON LAJÈ NWA
    M10 x 55 30±3 55±1.2 14. 5±0. 5 9. 6 ~ 10
    M10 x 60 30±3 60±1.2 14.5 + 0.5 9. 6 ~ 10
    M10 x 65 30±3 65±1.2 14. 5±0. 5 9. 6 ~ 10
    M12 x 65 36+4 65±1.2 15.2±0.4 11. 6 ~ 12
    M12 x 70 36+4 70+1. 2 15.2±0.4 11. 6 ~ 12
    M12 x 75 41+4 75+1. 2 15.2±0.4 11. 6 ~ 12
    M16 x 85 44+4 85+1. 2 19. 0-19. 9 15. 3 ~ 16
    M20 x 120 50+5 120+2. 0 24±0.8 18. 9 ~ 20

    Pwopriyete mekanik boulon yo pa dwe pi ba pase klas 8.8 espesifye nan GB / T 3098.1, ak tolerans fil la dwe 6G. Pwopriyete mekanik nwa a dwe konfòme yo ak kondisyon Klas 8 espesifye pou nwa nan GB / T 3098.2, tolerans fil 6h.

    BAG JOINT

    bag joint
    NON GASKET REKÒMANDASYON SÈVIS JENERAL RANJE TANPERATI
    EPDM E Ekipman pou dlo, drenaj, dlo egou ak lè tanperati nòmal, asid fèb ak alkali fèb -30 ° C ~ + 130 ° C
    NBR D Lwil ki baze sou petwòl -20°C〜+80°C
    SILICOMN RAWBER S Dlo pou bwè, lè cho sèk ak kèk pwodwi chimik cho -40 ° C ~ + 180 ° C

    Bride

    SOUDE KOU FLANGE

    Estanda: ASME/ANSI B16.9 Klas: WPB

    soude nack bride
    NPS OD ID Epesè Pwa inite
    pous mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    BLIND FLANGE

    Estanda: ASME/ANSI B16.9 Klas: WPB

    bride avèg
    NPS OD ID Epesè pwa inite
    pous mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    Glise sou bride

    Estanda: ASME/ANSI B16.9 Klas: WPB

    glise sou bride
    NPS OD ID Epesè pwa inite
    pous mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    THREADED FLANGE

    Estanda: ASME/ANSI B16.9 Klas: WPB

    threaded bride
    NPS OD ID Epesè pwa inite
    pous mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    VLE TRAVAY AK NOU?

    KONTAKTE NOU
  • Previous:
  • Pwochen:

    • PWODWI ki gen rapò

    Frape antre pou fè rechèch oswa ESC pou fèmen