Pangembangan kita gumantung ing peralatan canggih, bakat sing apik lan kekuwatan teknologi sing terus-terusan dikuatake kanggo Lembar Rega kanggo Produsen China Tee / Pipe Elbow / Flange HDPE Pipe Fitting karo Butt Fusion Welding / Electrofusion kanggo Irigasi / Pasokan Banyu / Pertambangan, Kita nampani para pembeli saka kabeh ing saindhenging donya kanggo mesthekake interaksi perusahaan sing stabil lan saling efektif, supaya bisa mlaku bebarengan.
pembangunan kita gumantung ing peralatan majeng, talents banget lan terus-terusan dikuwati pasukan teknologi kanggoChina HDPE Fitting, Pipa HDPE Kab, Produk lan solusi kita utamane diekspor menyang Asia Tenggara Euro-Amerika, lan dodolan menyang kabeh negara kita. Lan gumantung ing kualitas banget, rega cukup, layanan paling apik, kita saiki wis tak saran apik saka pelanggan jaban rangkah. Sampeyan olèh gabung kita kanggo liyane kemungkinan lan keuntungan. We welcome pelanggan, asosiasi bisnis lan kanca saka kabeh bagéan donya kanggo hubungi kita lan ngupaya kerjasama kanggo keuntungan bebarengan.
Tianjin Youfa International Trade Co., Ltd
Pemasangan Alur Baja Karbon
Standar: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etc.
Kelas baja: GR.A GR.B
Lumahing: Red Painted utawa Blue Painted utawa Silver Painted
LINTANG MEKANIKAL (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 100x50 (4x2) | 114.3x60.3 |
| 100x65 (4x2-1/2) | 114.3x73 |
| 100x65(4x2-1/2) | 114.3x76. 1 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139,7x76. 1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65(6x2-1/2) | 165.1x 76. 1 |
| 150x80 (6x3) | 165.1x88.9 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x80 (8x3) | 219.1x88.9 |
| 200x100 (8x4) | 219.1x114.3 |
LINTANG MEKANIKAL (THREADED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xr |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8x1) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
TEE MEKANIK (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 100x50 (4x2) | 114,3x60,3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x80 (5x3) | 139.7x88.9 |
| 150x65 (6x2-1/2) | 165.1x76.1 |
| 150x100 (6x4) | 165.1x114.3 |
| 200x65(8x2-1/2) | 219.1x76.1 |
| 200x100 (8x4) | 219.1x114.3 |
TEE MEKANIK (THREADED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50x25 (2x1) | 60.3xRcl |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65x40 (2-1/2x1-1/2) | 76. lxRcl-1/2 |
| 80x25 (3x1) | 88.9xr |
| 80x50 (3x2) | 88.9xRc2 |
| 100x25 (4x1) | 108xRcl |
| 100x65(4x2-1/2) | 108xRc2-1/2 |
| 100x25 (4x1) | 114.3xRcl |
| 100x65 (4x2-1/2) | 114.3xRc2-1/2 |
| 125x25 (5x1) | 133xRcl |
| 125x80 (5x3) | 133xRc3 |
| 125x25 (5x1) | 139.7xRcl |
TEE REDUCING (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 65x50(2/1/2x2) | 76.1x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x50 (4x2-1/2) | 108x76.1 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x100 (5x4) | 133x108 |
| 125x65(5x2-1/2) | 139.7x76.1 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x100 (6x4) | 159x108 |
| 150x125 (6x5) | 159x133 |
| 150x65 (6x2-1/2) | 165.1x 76. 1 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x50 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
TEE (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50 (2) | 60.3 |
| 65(2-1/2) | 76.1 |
| 80 (3) | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125(5) | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150(6) | 165.1 |
| 150⑹ | 168.3 |
| 200⑻ | 219.1 |
REDUCING CROSS (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 100x65(4x2-1/2) | 114.3x76 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 139,7x76 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 165.1x76 |
| 150x125 (6x5) | 165.1x139. 7 |
| 200x100 (8x4) | 219.1x114.3 |
| 200x150 (8x6) | 219.1x165.1 |
SALANG (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 114.3 |
| 125⑸ | 139.7 |
| 150(6) | 165 |
| 200⑻ | 219.1 |
45° Siku
22.5° Siku
90° Siku
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50⑵ | 60.3 |
| 65(2-1/2) | 76.1 |
| 80⑶ | 88.9 |
| 100⑷ | 108 |
| 100⑷ | 114.3 |
| 125⑸ | 133 |
| 125(5) | 139.7 |
| 150⑹ | 159 |
| 150⑹ | 165 |
| 200⑻ | 219.1 |
REDUCER (ULANG)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 50x20 (2x3/4) | 60.3xRc3/4 |
| 50x40 (2x1-1/2) | 60.3xRcl-1/2 |
| 65x25 (2-1/2x1) | 76. lxRcl |
| 65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
| 80x25 (3x1) | 88.9xr |
| 80x65(3x2-1/2) | 88.9xRc2-1/2 |
| 100x25 (4x1) | 108xRcl |
| 100x25 (4x1) | 114.3xRcl |
| 125x25 (5x1) | 133xRcl |
| 125x25 (5x1) | 139.7xRcl |
| 150x25 (6x1) | 159xRcl |
| 150x80 (6x3) | 159xRc3 |
| 150x25 (6x1) | 165. lxRcl |
| 150x80 (6x3) | 165. 1xRc3 |
| 200x25 (8xRcl) | 219. lxRcl |
| 200x80 (8x3) | 219. 1xRc3 |
REDUCER (GROOVED)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) |
| 65 x 50 (2-1/2 x 2) | 76.1x60.3 |
| 80x50 (3x2) | 88.9x60.3 |
| 80x65(3x2-1/2) | 88.9x76.1 |
| 100x65(4x2-1/2) | 108x76.1 |
| 100x80 (4x3) | 108x88.9 |
| 100x50 (4x2) | 114.3x60.3 |
| 100x80 (4x3) | 114.3x88.9 |
| 125x65(5x2-1/2) | 133x76.1 |
| 125x100 (5x4) | 133x114.3 |
| 125x50 (5x2) | 139.7x60.3 |
| 125x100 (5x4) | 139.7x114.3 |
| 150x65(6x2-1/2) | 159x76.1 |
| 150x125 (6x5) | 159x139.7 |
| 150x50 (6x2) | 165.1x60.3 |
| 150x125 (6x5) | 165.1x139.7 |
| 200x65 (8x2) | 219.1x60.3 |
| 200x150 (8x6) | 219.1x165.1 |
FLANGE tugas abot
(GORENG)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | UKURAN (MM) | NO. saka bolongan | |||
| A | B | c | D | ||||
| 65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
| 65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
| 100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
| 100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
| 150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
| 200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
Adaptor FLANGE
(GORENG)
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | UKURAN (MM) | NO. saka bolongan | |||
| A | B | c | D | ||||
| 50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
| 65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
| 80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
| 100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
| 125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
| 150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
| 200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | Dhuwur (MM) | |
| 50⑵ | 60.3 | 2.5 | 28 | |
| 65(2-1/2) | 76.1 | 2.5 | 28 | |
| 80⑶ | 88.9 | 2.5 | 29 | |
| 100⑷ | 108 | 2.5 | 31 | |
| 100⑷ | 114.3 | 2.5 | 31 | |
| 125(5) | 133 | 2.5 | 31.5 | |
| 125⑸ | 139.7 | 2.5 | 31.5 | |
| 150⑹ | 159 | 2.5 | 31.5 | |
| 150⑹ | 165.1 | 2.5 | 31 | |
| 200⑻ | 219.1 | 2.5 | 36.5 | |
FLANGE Utas
| UKURAN NORMAL (mm/in) | DIAMETER Njaba (mm) | TEKANAN KERJA (MPA) | UKURAN (MM) | NO. saka bolongan | |||
| A | B | c | D | ||||
| 25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
| 32 (1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
| 40 (1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
| 50 (2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
| 65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
| 80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
| 100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOLTS & NUTS
| UKURAN | PANJANG Utas L1 | DONGENG TOTAL | FISHTAIL BOLT WIDTH | NUT WIDHT |
| M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M10 x 60 | 30±3 | 60±1.2 | 14,5 + 0,5 | 9. 6~10 |
| M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6~10 |
| M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
| M12 x 70 | 36+4 | 70+1. 2 | 15.2±0.4 | 11. 6 ~ 12 |
| M12 x 75 | 41+4 | 75+1. 2 | 15.2±0.4 | 11. 6 ~ 12 |
| M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3~16 |
| M20 x 120 Kab | 50+5 | 120+2. 0 | 24±0.8 | 18. 9~20 |
Sifat mekanik bolt ora luwih murah tinimbang kelas 8.8 sing ditemtokake ing GB / T 3098.1, lan toleransi benang kudu 6G. Sifat mekanik kacang kudu tundhuk karo syarat Grade 8 sing ditemtokake kanggo kacang ing GB / T 3098.2, toleransi benang 6h.
RING GASKET
| NAMA | GASKET | REKOMENDASI LAYANAN UMUM | RANGE SUHU |
| EPDM | E | Pasokan banyu, got, limbah lan hawa suhu normal, asam lemah lan alkali sing lemah | -30°C~+130°C |
| NBR | D | Minyak adhedhasar petroleum | -20°C ~+80°C |
| KARET SILIKON | S | Banyu ngombé, hawa garing panas lan sawetara bahan kimia panas | -40°C~+180°C |
Dicet BiruFittings Pipa Grooved
Bagan ukuran kaya ing ndhuwur
Sliver Painted Pipa alur Fittings
Bagan ukuran kaya ing ndhuwur
