Izixhobo zoMbhobho wentsimbi kunye nentsimbi

Izixhobo zentsimbi kunye nentsimbi yombhobho oFakelweyo Umfanekiso
  • Izixhobo zoMbhobho wentsimbi kunye nentsimbi
  • Izixhobo zoMbhobho wentsimbi kunye nentsimbi
  • Izixhobo zoMbhobho wentsimbi kunye nentsimbi

Inkcazelo emfutshane:

Izixhobo zombhobho wentsimbi zizo zonke izifakelo zemibhobho ethwele uxinzelelo

HS IKHOWUDI: 73079300


  • MOQ ngokobungakanani:Iitoni ezi-2
  • Min. Ubungakanani boodolo:Isikhongozeli esinye
  • Ixesha leMveliso:ngokuqhelekileyo iintsuku ezingama-25
  • Indawo yokuthumela:Xingang Tianjin Port e China
  • Immimiselo yokuhlawula:L/C,D/A,D/P,T/T
  • Uphawu:UYOFA
  • Ixabiso:FOB CFR CIF
  • Indawo yemvelaphi:eTshayina
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iindidi zokufakelwa kwemibhobho zinokuhlelwa ngokusetyenziswa kwazo:

    Izixhobo zombhobho ezisetyenziselwa ukudibanisa imibhobho: iiflange, ukudibanisa, iintambo zombhobho, i-sleeve couplings.
    Izixhobo zombhobho ezisetyenziselwa ukutshintsha ulwalathiso lwemibhobho: ii-elbows, ukugoba.
    Izixhobo zombhobho ezisetyenziselwa ukutshintsha ububanzi beepayipi: i-reducers (i-eccentric kunye ne-concentric), ukunciphisa i-elbows.
    Izixhobo zombhobho ezisetyenziselwa ukongeza amasebe kwimibhobho: ii tee, iminqamlezo.
    Izifakelo zemibhobho ezisetyenziselwa ukutywina imibhobho: iigaskets, iiflange ezingaboniyo, iminqwazi yemibhobho, iminqwazi engaboniyo.

    I-Carbon Steel Butt eWelded kunye nokuFakwa kwemibhobho engenamthungo

    45°,90°KUNYE 180°I-CARBON YE-STEEL ELBOW

    Umgangatho: ASME / ANSI B16.9 / ASTM A235

    IBakala: WPB; WPC

    45° ELBOW

    45°Ingqiniba

    90° ELBOW

    90°Ingqiniba

    180°Ingqiniba

    180°Ingqiniba

    Ngaphandle Ububanzi Ukutyeba kweendonga
    (mm)    		 Ubunzima bethiyori
    45° 90° 180 °
    INCH MM I-SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    NGQO KUNYE NE-REDUCER TEE

    Umgangatho: ASME / ANSI B16.9 / ASTM A234

    IBakala: WPB; WPC

    TEE

    Ngqo Tee

    REDUCER TEE

    Umnciphisi uTee

    Ngaphandle Ububanzi Ngaphandle Ububanzi
    INCH MM INCH MM
    3/4x3/4 26.7x26.7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 219.1x219.1
    1x3/4 33.4x26.7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3zx60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    I-CONCENTRIC NE-ECCENTRIC REDUCER

    Umgangatho: ASME / ANSI B16.9 / ASTM A234

    IBakala: WPB; WPC

    CON REDUCER

    I-CON Reducer

    I-ECC REDUCER

    I-ECC Nciphisi

    Ngaphandle Ububanzi Ngaphandle Ububanzi
    INCH MM INCH MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33.4X26.7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Intsimbi eMalleable eGalini kunye nokuFakwa okuMnyama

    Umgangatho: ENGB/T-3287 ; I-BS EN-10242; KHT300-6njl.

    Material: Intsimbi eMalleable

    Umphezulu: Igalvanized okanye uMnyama Wendalo

    Umphezulu wangaphakathi: Kunye okanye Ngaphandle kwePVC eqatywe

    Bushing

    SIZE In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Umanyano

    SIZE In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    SIZE In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    umanyano

    Ngqo Tee

    SIZE In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    SIZE In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Ukudibanisa

    SIZE In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    SIZE In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Ukunciphisa iSocket

    Ubungakanani mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Ubungakanani mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1½x 3/4 1½ x1
    A 49 49 49 53 53 53
    Ubungakanani mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Ubungakanani mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½ x3/4 2 1/2x2 2½ x1¼ 2 ½x1½ 2 ½ x2
    A 72 72 72 72 72 72
    Ubungakanani mm 80x15 80x 20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Ubungakanani mm 80x65 100 x15 100x20 100 x 25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Ubungakanani mm 100x50 100x 65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Ukunciphisa iSocket

    Octagonal Cap

    Ubungakanani In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Ubungakanani In 2
    mm 50
    A 32
    S 65
    Octagonal Cap

    Iplagi engenanto

    Ubungakanani In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B I-10 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Ubungakanani In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    iplagi ecacileyo

    Ingono yomphanda

    Ubungakanani In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Ubungakanani In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    phosa_ingono_yentsimbi

    90 Ingqiniba

    Ubungakanani Mna n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Ubungakanani In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77.5 96.5 129
    90 ingqiniba

    45 Ingqiniba

    Ubungakanani In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Ubungakanani In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 . 5 64 . 5 129
    45 ingqiniba

    Ukunciphisa i-Elbow

    Ubungakanani In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Ubungakanani Kwi 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96.5
    B 65 74 90 100 120
    ukunciphisa ingqiniba

    UkunciphisaTshini

    Ubungakanani In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Ubungakanani In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Ubungakanani In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Ubungakanani In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Ubungakanani In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40 x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Ukunciphisa iTee 异径三通

    Grooved Ukufaneleka

    Umgangatho: ANSI B36.10, JIS B2302,ASME/ANSI/BS1560/DIN2616 njl.

    Ibakala lentsimbi: GR.A GR.B

    Umphezulu: Ipeyintiwe eBomvu okanye iBlue okanye ipeyintiwe yeSilivere

    UMNQAMLEKO WOOMATSHINI (UGROOVED)

    grooved mechanical cross
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    100x50(4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65(4x2-1/2) 114.3x76. 1
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76. 1
    125x80(5x3) 139.7x88.9
    150x65(6x2-1/2) 165.1x 76. 1
    150x80(6x3) 165.1x88.9
    150x100(6x4) 165.1x114.3
    200x65(8x2-1/2) 219.1x76.1
    200x80(8x3) 219.1x88.9
    200x100(8x4) 219.1x114.3

    UMNQANDA WOOMATSHINI (ONEMICHU)

    umnqamlezo womatshini onemisonto
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 165. 1xRc3
    200x25(8x1) 219. lxRcl
    200x80(8x3) 219. 1xRc3

    UMACHHANICAL TEE (GROOVED)

    grooved mechanical tee
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    100x50(4x2) 114,3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65(8x2-1/2) 219.1x76.1
    200x100(8x4) 219.1x114.3

    UMACHHANICAL TEE (ENEMICHA)

    i-threaded mechanical tee
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65(4x2-1/2) 108xRc2-1/2
    100x25(4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    UKUNCIPHA ITEE (IGROOVED)

    grooved ukunciphisa tee
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    65x50(2/1/2x2) 76.1x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x50(4x2-1/2) 108x76.1
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x100(5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100(6x4) 159x108
    150x125(6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76. 1
    150x125(6x5) 165.1x139.7
    200x50(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    TEE (GROOVED)

    i-grooved tee
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    50(2) 60.3
    65(2-1/2) 76.1
    80(3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150(6) 165.1
    150⑹ 168.3
    200⑻ 219.1

    UKUNCIPHISA UMNQAMLEKO (UGROOVED)

    grooved ukunciphisa umnqamlezo
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    100x65(4x2-1/2) 114.3x76
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 165.1x76
    150x125(6x5) 165.1x139. 7
    200x100(8x4) 219.1x114.3
    200x150(8x6) 219.1x165.1

    UMNQWEBO (GROOVED)

    umnqamlezo
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200⑻ 219.1

    45° Ingqiniba

    45° ingqiniba

    22.5° Ingqiniba

    22.5° ingqiniba

    90° Ingqiniba

    90° ingqiniba
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    I-REDUCER (ENEMICHA)

    Isinciphisi esinemisonto
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    50x20(2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25(2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25(3x1) 88.9xRcl
    80x65(3x2-1/2) 88.9xRc2-1/2
    100x25(4x1) 108xRcl
    100x25(4x1) 114.3xRcl
    125x25(5x1) 133xRcl
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 159xRc3
    150x25(6x1) 165. lxRcl
    150x80(6x3) 165. 1xRc3
    200x25(8xRcl) 219. lxRcl
    200x80(8x3) 219. 1xRc3

    I-REDUCER (GROOVED)

    isinciphisi esichetyiweyo
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50(3x2) 88.9x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x65(4x2-1/2) 108x76.1
    100x80(4x3) 108x88.9
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100(5x4) 133x114.3
    125x50(5x2) 139.7x60.3
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 159x76.1
    150x125(6x5) 159x139.7
    150x50(6x2) 165.1x60.3
    150x125(6x5) 165.1x139.7
    200x65(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    UMSEBENZI ONZIMA FLANGE

    (GROOVED)

    umsebenzi onzima flange
    UBUHLU OBQELWEYO(mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm) UXINZELELO LOMSEBENZI (MPA) IMILINGANISELO(MM) HAYI. YEMIGWEBI
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    I-ADAPTER FLANGE

    (GROOVED)

    I-ADAPTER FLANGE
    UBUHLU OBQELWEYO(mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm) UXINZELELO LOMSEBENZI (MPA) IMILINGANISELO(MM) HAYI. YEMIGWEBI
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 8\12

    UFLANGE OYImfama

    UFLANGE OYImfama
    UBUHLU OBQELWEYO(mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm) UXINZELELO LOMSEBENZI (MPA) UBUDLA(MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36.5

    FLANGE ENEMICHA

    FLANGE ENEMICHA
    UBUHLU OKOKUQHELEKILEYO (mm/ngaphakathi) NGAPHANDLE IDIAMETER(mm) UXINZELELO LOMSEBENZI (MPA) IMILINGANISELO(MM) HAYI. YEMIGWEBI
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32(1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    IBOLTS & NUTS

    iibholiti kunye namantongomane
    SIZE UBUDE OBUNEMICHULU L1 UBUDE BONKE IBHUTI YOMLOBI UBUNZI UBUBNZI WOKUNTU
    M10 x 55 30±3 55±1.2 14. 5±0. 5 9. 6~10
    M10 x 60 30±3 60±1.2 14.5 + 0.5 9. 6~10
    M10 x 65 30±3 65±1.2 14. 5±0. 5 9. 6~10
    M12 x 65 36+4 65±1.2 15.2±0.4 11. 6~12
    M12 x 70 36+4 70+1. 2 15.2±0.4 11. 6 ~12
    M12 x 75 41+4 75+1. 2 15.2±0.4 11. 6 ~12
    M16 x 85 44+4 85+1. 2 19. 0-19. 9 15. 3–16
    M20 x 120 50+5 120+2. 0 24±0.8 18. 9-20

    Iimpawu zemishini yeebholithi aziyi kuba ngaphantsi kwebakala le-8.8 elichazwe kwi-GB / T 3098.1, kwaye ukunyamezela intambo kuya kuba yi-6G. Iimpawu zomatshini we-nut ziya kuhambelana neemfuno zeBakala 8 ezichazwe kwiintongomane kwi-GB / T 3098.2, ukunyamezela intambo 6h.

    IGASKET RING

    ring gasket
    NAME IGASKET INGCEBISO YENKONZO JIKELELE UHLELO LWETEMPERATURE
    EPDM E Unikezelo lwamanzi, ukuhanjiswa kwamanzi, ugutyulo kunye nobushushu obuqhelekileyo bomoya, i-asidi ebuthathaka kunye ne-alkali ebuthathaka -30°C~+130°C
    NBR D I-oyile esekelwe kwi-petroleum -20°C〜+80°C
    Irabha ye-SILICOMN S Amanzi okusela, umoya oshushu owomileyo kunye neekhemikhali ezishushu -40°C ~+180°C

    I-Flange

    UKUSHISA INTAMO FLANGE

    Umgangatho: ASME/ANSI B16.9 IBanga: WPB

    i-welded nack flange
    NPS OD ID Ukutyeba Ubunzima beyunithi
    intshi mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    UFLANGE OYImfama

    Umgangatho: ASME/ANSI B16.9 IBanga: WPB

    iflange eyimfama
    NPS OD ID Ukutyeba ubunzima beyunithi
    intshi mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    TSHIBELA KWIFLANGE

    Umgangatho: ASME/ANSI B16.9 IBanga: WPB

    tyibilika kwiflange
    NPS OD ID Ukutyeba ubunzima beyunithi
    intshi mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    FLANGE ENEMICHA

    Umgangatho: ASME/ANSI B16.9 IBanga: WPB

    iflange enemisonto
    NPS OD ID Ukutyeba ubunzima beyunithi
    intshi mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    UFUNA UKUSEBENZA NATHI?

    QHAGAMSHELANA NATHI
  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO

    Cofa u-enter ukukhangela okanye i-ESC ukuvala