Ulwazi Olujwayelekile lwe-Tinplate
I-Tinplate ngokuvamile iyishidi lensimbi eligoqekile elibandayo eline-tin emsulwa yezentengiselwano ezinhlangothini zombili, elihlanganisa amandla nokwakheka kwensimbi nokumelana nokugqwala, ukushibilika kanye nokubonakala kwe-tin. Imikhiqizo isetshenziswa kabanzi embonini yokupakisha ukudla nakwezinye izitsha, imikhiqizo yokunyathela, njengezitini zokudla, izitini zokufafaza, izivalo zamabhodlela, izitini zezipho, amabhethri, izesekeli ze-elekthronikhi njalo njalo.
Isicelo se-Tinplate
Amathini Okudla, Iziphuzo Amathini
Ithangi Lamakhemikhali
Amathini Okufutha E-Aerosol
Izingxenye ze-elekthronikhi
Umzimba Weseli
Amanye Amathini Ahlukahlukene
Izindinganiso Zobuchwepheshe ze-Tinplate
Inani lokufaka ithini elijwayelekile: 1.1 g/m2, 2.2 g/m2, 2.8 g/m2, 5.6 g/m2, 8.4 g/m2
| Indlela Yokuhlela | Isikhombisi Esihamba Phambili | Igama Lekhodi |
| Ibanga Lensimbi Yepuleti Lokuqala | Inombolo yebanga lensimbi | I-SPCC、MR、L... |
| Imininingwane | Ubukhulu(I-1965)mm） | 0.14-0.60 |
| Ububanzi(I-1965)mm） | 600-1050 | |
| Ukwelashwa Okuphezulu | Ukwelashwa kwe-passivation | C1、C2、C3、C4、C0 |
| Utshwala obunamafutha | D2.5、D3.0、D3.5、D4.0、D5.0、D7.0 |
Ukuqina kwe-Tinplate
| Ikhodi yokucima nokulungisa | Ukuqina kwethagethi(I-1965)HR30Tm） | Sebenzisa |
| T-1 | 49 | Ifaneleka kakhulu amathangi okucubungula ajulile adinga ukuthamba. |
| T-2 | 53 | Ifanele amathangi okucubungula ajulile adinga ukuthamba okuvamile. |
| T-2.5 | 55 | Ifanele umzimba wethangi noma isembozo sethangi okudinga ukuguquguquka okuhle. |
| I-T-3 | 57 | Ifanele imizimba yethangi kanye nezivalo ezidinga ubulukhuni obukhulu. |
| T-3.5 | 59 | Ifanele amathangi ajwayelekile adinga ukuqina okuhle. |
| I-T-4 | 61 | Ifanele amathangi ajwayelekile adinga ukuqina okukhulu. |
| I-T-5 | 65 | Ifanele umzimba wethangi noma isembozo samathangi amakhulu kanye nemithambo yokucindezela yangaphakathi edinga ukumelana okuhle kakhulu nokugoba. |
| DR-7M | 71 | Ifanele umzimba kanye nesembozo samathini okudla adinga ukuqina namandla athile. |
| DR-8 | 73 | Ifanele umzimba kanye nesembozo samathini okudla adinga ukuqina namandla athile. |
| DR-9 | 76 | Ifanelekela amathini ebhiya neziphuzo ezine-carbonated anokuqina okuthile kanye namandla athile. |
| I-DR-9M | 77 | Ifanelekela izivalo zikabhiya neziphuzo ezine-carbonated ezidinga ukuqina okuthile kanye namandla. |
| DR-10 | 80 | Kufanelekela izivalo zamabhodlela zezinga eliphezulu ezidinga ukuqina okuthile kanye namandla. |
