Ffitiadau Pibellau Haearn a Dur

Ffitiadau Pibellau Haearn a Dur Delwedd dan Sylw
  • Ffitiadau Pibellau Haearn a Dur
  • Ffitiadau Pibellau Haearn a Dur
  • Ffitiadau Pibellau Haearn a Dur

Disgrifiad Byr:

Mae ffitiadau pibellau dur i gyd yn ffitiadau pibell sy'n dwyn pwysau

CÔD HS: 73079300


  • MOQ Fesul Maint:2 tunnell
  • Minnau. Nifer yr archeb:Un cynhwysydd
  • Amser cynhyrchu:25 diwrnod fel arfer
  • Porth Cyflenwi:Xingang Tianjin Port yn Tsieina
  • Telerau Talu:L/C, D/A, D/P, T/T
  • Brand:YOUFA
  • Pris:FOB CFR CIF
  • Man Tarddiad:Tsieina
    • Lawrlwythwch fel PDF

    Manylion Cynnyrch

    Tagiau Cynnyrch

    Gellir dosbarthu'r mathau o ffitiadau pibellau yn ôl eu defnydd:

    Ffitiadau pibell a ddefnyddir ar gyfer cysylltu pibellau: flanges, cyplyddion, clampiau pibell, cyplyddion llewys.
    Ffitiadau pibellau a ddefnyddir i newid cyfeiriad pibellau: penelinoedd, troadau.
    Ffitiadau pibell a ddefnyddir i newid diamedr pibellau: gostyngwyr (ecsentrig a consentrig), lleihau penelinoedd.
    Ffitiadau pibellau a ddefnyddir i ychwanegu canghennau at biblinellau: ti, croesau.
    Ffitiadau pibellau a ddefnyddir ar gyfer selio piblinellau: gasgedi, flanges dall, capiau pibell, capiau dall.

    Casgen Dur Carbon Wedi'i Weldio a Gosod Pibellau Di-dor

    45°, 90° A 180° CARBON DUR ELBOW

    Safon: ASME / ANSI B16.9 / ASTM A235

    Gradd: WPB; WPC

    45°ELBOW

    45° Penelin

    90°ELBOW

    90° Penelin

    180° Penelin

    180° Penelin

    Diamedr y tu allan Trwch Wal
    (mm)    		 Pwysau Damcaniaethol
    45° 90° 180°
    INCH MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    TÎS SYTH A LLEIHAU

    Safon: ASME / ANSI B16.9 / ASTM A234

    Gradd: WPB; WPC

    TEE

    Te Syth

    REDUCER TEE

    Tee lleihäwr

    Diamedr y tu allan Diamedr y tu allan
    INCH MM INCH MM
    3/4x3/4 26.7x26.7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 219.1x219.1
    1x3/4 33.4x26.7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3zx60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    GOSTYNGEDIG AC ECCENTRIAIDD

    Safon: ASME / ANSI B16.9 / ASTM A234

    Gradd: WPB; WPC

    CON REDUCER

    CON Lleihau

    REDUCER ECC

    Gostyngydd ECC

    Diamedr y tu allan Diamedr y tu allan
    INCH MM INCH MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33.4X26.7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 219.1x168.3
    1 1/4x3/4 42.2x26.7 8x4 219.1x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Haearn hydrin Galfanedig a Du

    Safon: ENGB/T-3287; BS EN-10242; KHT300-6etc.

    Deunydd: Haearn hydrin

    Arwyneb: Galfanedig neu Ddu Naturiol

    Arwyneb Mewnol: Gyda neu Heb Gorchudd PVC

    Bushing

    MAINT In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Undeb

    MAINT In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    MAINT In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    undeb

    Te Syth

    MAINT In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    MAINT In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC00019 拷贝

    Cyplu

    MAINT In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    MAINT In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Lleihau Soced

    Maint mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Maint mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1 ½x 3/ 4 1½ x1
    A 49 49 49 53 53 53
    Maint mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x 1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Maint mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 ½x3/4 2 1/2x2 2½ x1¼ 2 ½x1½ 2½ x2
    A 72 72 72 72 72 72
    Maint mm 80x15 80x20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Maint mm 80x65 100 x15 100x20 100 x 25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Maint mm 100x50 100x65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Lleihau Soced

    Cap wythonglog

    Maint In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Maint In 2
    mm 50
    A 32
    S 65
    Cap wythonglog

    Plwg Plaen

    Maint In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 1 0 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Maint In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    plwg plaen

    Barrel Deth

    Maint In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Maint In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    cast_iron_nipple

    90 Penelin

    Maint Rwy'n n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Maint In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77.5 96.5 129
    90 penelin

    45 Penelin

    Maint In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Maint In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 . 5 64 . 5 129
    45 penelin

    Lleihau Elbow

    Maint In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Maint Yn 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96.5
    B 65 74 90 100 120
    lleihau penelin

    LleihauTi

    Maint In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Maint In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Maint In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Maint In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Maint In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40 x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Lleihau Tee 异径三通

    Ffitio rhigol

    Safon: ANSI B36.10, JIS B2302, ASME / ANSI / BS1560 / DIN2616 ac ati.

    Dur gradd: GR.A GR.B

    Arwyneb: Wedi'i Baentio'n Goch neu wedi'i Baentio'n Las neu wedi'i Baentio ag Arian

    CROES FECANYDDOL (WEDI'I GROES)

    croes mecanyddol rhigol
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    100x50(4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65(4x2-1/2) 114.3x76. 1
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76. 1
    125x80(5x3) 139.7x88.9
    150x65(6x2-1/2) 165.1x 76. 1
    150x80(6x3) 165.1x88.9
    150x100(6x4) 165.1x114.3
    200x65(8x2-1/2) 219.1x76.1
    200x80(8x3) 219.1x88.9
    200x100(8x4) 219.1x114.3

    CROES FECANYDDOL (THREADED)

    croes fecanyddol wedi'i edafu
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl- 1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 165. 1xRc3
    200x25(8x1) 219. lxRcl
    200x80(8x3) 219. 1xRc3

    TÎ MECANYDDOL (WEDI'I GROES)

    ti mecanyddol rhigol
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    100x50(4x2) 114,3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65(8x2-1/2) 219.1x76.1
    200x100(8x4) 219.1x114.3

    TÎ MECANYDDOL (THREADED)

    ti mecanyddol edafedd
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl
    65x40(2-1/2x1-1/2) 76. lxRcl- 1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65(4x2-1/2) 108xRc2-1/2
    100x25(4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    LLEIHAU TÎ (GROOVED)

    ti rhydwytho
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    65x50(2/1/2x2) 76.1x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x50(4x2-1/2) 108x76.1
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x100(5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100(6x4) 159x108
    150x125(6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76. 1
    150x125(6x5) 165.1x139.7
    200x50(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    TÎ (RHYCH)

    ti rhigol
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    50(2) 60.3
    65(2-1/2) 76.1
    80(3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150(6) 165.1
    150⑹ 168.3
    200 ⑻ 219.1

    LLEIHAU CROES (GROOVED)

    rhigol lleihäwr croes
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    100x65(4x2-1/2) 114.3x76
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 165.1x76
    150x125(6x5) 165.1x139. 7
    200x100(8x4) 219.1x114.3
    200x150(8x6) 219.1x165.1

    CROESO (RHYCH)

    croes
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150(6) 165
    200 ⑻ 219.1

    Penelin 45°

    penelin 45°

    Penelin 22.5°

    penelin 22.5°

    Penelin 90°

    penelin 90°
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200 ⑻ 219.1

    LLEIHAU (THREADED)

    Lleihäwr edau
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    50x20(2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25(2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25(3x1) 88.9xRcl
    80x65(3x2-1/2) 88.9xRc2-1/2
    100x25(4x1) 108xRcl
    100x25(4x1) 114.3xRcl
    125x25(5x1) 133xRcl
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 159xRc3
    150x25(6x1) 165. lxRcl
    150x80(6x3) 165. 1xRc3
    200x25(8xRcl) 219. lxRcl
    200x80(8x3) 219. 1xRc3

    LLEIHAU (GROOVED)

    lleihäwr rhigol
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm)
    65 x 50 (2-1/2 x 2) 76.1x60.3
    80x50(3x2) 88.9x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x65(4x2-1/2) 108x76.1
    100x80(4x3) 108x88.9
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100(5x4) 133x114.3
    125x50(5x2) 139.7x60.3
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 159x76.1
    150x125(6x5) 159x139.7
    150x50(6x2) 165.1x60.3
    150x125(6x5) 165.1x139.7
    200x65(8x2) 219.1x60.3
    200x150(8x6) 219.1x165.1

    FFLINT DYLETSWYDD THRWM

    (GROED)

    fflans ddyletswydd trwm
    MAINT ARFEROL(mm/mewn) DIAMETER TU ALLAN (mm) PWYSAU GWAITH(MPA) DIMENSIYNAU(MM) RHIF. O DYLAU
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65⑶ 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200 ⑻ 219.1 2.5 77 20 360 310 12

    FFLINT ADAPTER

    (GROED)

    FFLINT ADAPTER
    MAINT ARFEROL(mm/mewn) DIAMETER TU ALLAN (mm) PWYSAU GWAITH(MPA) DIMENSIYNAU(MM) RHIF. O DYLAU
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200 ⑻ 219.1 1.6 78 19 340 295 8\12

    FFLANT DDALL

    FFLANT DDALL
    MAINT ARFEROL(mm/mewn) DIAMETER TU ALLAN (mm) PWYSAU GWAITH(MPA) UCHDER(MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200 ⑻ 219.1 2.5 36.5

    FFLACH TRYDEDIG

    FFLACH TRYDEDIG
    MAINT ARFEROL (mm/mewn) DIAMETER TU ALLAN (mm) PWYSAU GWAITH(MPA) DIMENSIYNAU(MM) RHIF. O DYLAU
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32(1-1/4) Rcl- 1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl- 1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    BOLTAU A NUTS

    bolltau a chnau
    MAINT HYD EDAU L1 CYFANSWM HYD LLED BOLT FISHTAIL NUT WIDHT
    M10 x 55 30±3 55±1.2 14. 5±0. 5 9. 6~10
    M10 x 60 30±3 60±1.2 14.5 + 0.5 9. 6~10
    M10 x 65 30±3 65±1.2 14. 5±0. 5 9. 6~10
    M12 x 65 36+4 65±1.2 15.2±0.4 11. 6~12
    M12 x 70 36+4 70+1. 2 15.2±0.4 11. 6 ~12
    M12 x 75 41+4 75+1. 2 15.2±0.4 11. 6 ~12
    M16 x 85 44+4 85+1. 2 19. 0-19. 9 15. 3~16
    M20 x 120 50+5 120+2. 0 24±0.8 18. 9~20

    Ni fydd priodweddau mecanyddol bolltau yn is na gradd 8.8 a nodir yn GB / T 3098.1, a goddefgarwch yr edau fydd 6G. Rhaid i briodweddau mecanyddol y cnau gydymffurfio â gofynion Gradd 8 a bennir ar gyfer cnau yn GB / T 3098.2, goddefgarwch edau 6h.

    RING GASGET

    modrwy gasged
    ENW GASGED ARGYMHELLIAD GWASANAETH CYFFREDINOL YSTOD TYMHEREDD
    EPDM E Cyflenwad dŵr, draeniad, carthffosiaeth ac aer tymheredd arferol, asid gwan ac alcali gwan -30 ° C ~ + 130 ° C
    NBR D Olewau petrolewm -20°C〜+80°C
    RWBER SILICOMN S Dŵr yfed, aer sych poeth a rhai cemegau poeth -40 ° C ~ + 180 ° C

    fflans

    WELDING FFLANS GWddf

    Safon: ASME/ANSI B16.9 Gradd: WPB

    fflans nack weldio
    NPS OD ID Trwch Pwysau Uned
    modfedd mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    FFLANT DDALL

    Safon: ASME/ANSI B16.9 Gradd: WPB

    fflans ddall
    NPS OD ID Trwch pwysau uned
    modfedd mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    SLIP AR FFLACH

    Safon: ASME/ANSI B16.9 Gradd: WPB

    llithro ar fflans
    NPS OD ID Trwch pwysau uned
    modfedd mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    FFLACH TRYDEDIG

    Safon: ASME/ANSI B16.9 Gradd: WPB

    fflans wedi'i edafu
    NPS OD ID Trwch pwysau uned
    modfedd mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    EISIAU GWEITHIO GYDA NI?

    CYSYLLTWCH Â NI
  • Pâr o:
  • Nesaf:

    • CYNHYRCHION CYSYLLTIEDIG

    Tarwch enter i chwilio neu ESC i gau