Izeren en Stalen Pipe Fittings

Izeren en stielen Pipe Fittings Featured Image
  • Izeren en Stalen Pipe Fittings
  • Izeren en Stalen Pipe Fittings
  • Izeren en Stalen Pipe Fittings

Koarte beskriuwing:

Steel pipe fittings binne alle druk-bearing pipe fittings

HS KODE: 73079300


  • MOQ per grutte:2 ton
  • Min. Order Quantity:Ien kontener
  • Produksjetiid:meastal 25 dagen
  • Levering haven:Xingang Tianjin Port yn Sina
  • Betellingsbetingsten:L/C, D/A, D/P, T/T
  • Merk:YOUFA
  • Priis:FOB CFR CIF
  • Plak fan oarsprong:Sina
    • Download as PDF

    Produkt Detail

    Produkt Tags

    De soarten piipfittings kinne wurde klassifisearre neffens har gebrûk:

    Pipe fittings brûkt foar it ferbinen fan pipen: flanges, couplings, pipe clamps, sleeve couplings.
    Pipe fittings brûkt om te feroarjen de rjochting fan pipen: elbows, bochten.
    Pipefittings brûkt om de diameter fan pipen te feroarjen: reduktinten (eksintrysk en konsintrysk), ferminderjen fan elbows.
    Pipe fittings wurde brûkt om tûken ta te foegjen oan pipelines: tees, krusingen.
    Pipe fittings brûkt foar sealing pipelines: pakkingen, bline flanges, pipe caps, blind caps.

    Carbon Steel Butt Welded en Seamless Pipe Fitting

    45°, 90° EN 180° KOOLSTAL ELLEBOOG

    Standert: ASME / ANSI B16.9 / ASTM A235

    Grade: WPB; WPC

    45°ELBOOG

    45°Elbow

    90°ELBOOG

    90° Elbow

    180° Elbow

    180° Elbow

    Buitendiameter Wall Dikte
    (mm)    		 Teoretyske gewicht
    45° 90° 180°
    INCH MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48,3 3.68 0.18 0.38 0.72
    2 60,3 3.91 0.38 0.65 1.3
    2 1/2 73,0 5.16 0.65 1.29 2.58
    3 88,9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168,3 7.11 6.06 10.1 20.2
    8 219.1 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323,9 9.53 38.6 66.1 108
    14 355,6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457,2 9.53 56,5 113 226
    20 508 9.53 70 140 230
    22 558,8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660,4 9.53 119 238 476

    RJOCHTTE EN REDUCER TEE

    Standert: ASME / ANSI B16.9 / ASTM A234

    Grade: WPB; WPC

    TEE

    Rjochte Tee

    REDUCER TEE

    Reducer Tee

    Buitendiameter Buitendiameter
    INCH MM INCH MM
    3/4x3/4 26,7x26,7 6x6 168,3x168,3
    3/4x1/2 26,7x21,3 6x5 168,3x141,3
    1x1 33,4x33,4 8x8 219.1x219.1
    1x3/4 33,4x26,7 8x6 219.1x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42,2x33,4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323,8x323,8
    1 1/2x1 1/4 48,3*42,2 12x10 323,8x273,1
    2x2 60.3zx60.3 14x14 355,6x355,6
    2x1 1/2 60,3x48,3 14x12 355,6x323,8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88,9x73 18x16 457x406,4
    4x4 114,3x114,3 20x20 508x508
    4x3 114,3x88,9 20x18 508x457
    5x5 141,3x141,3 24x24 610x610
    5x4 141,3x114,3 24x20 610x508

    KONSINTRISK EN EKSENTRISK REDUCER

    Standert: ASME / ANSI B16.9 / ASTM A234

    Grade: WPB; WPC

    CON REDUCER

    CON Reducer

    ECC REDUCER

    ECC Reducer

    Buitendiameter Buitendiameter
    INCH MM INCH MM
    3/4x1/2 26,7x21,3 5x3 141,3x88,9
    1x3/4 33.4X26.7 6x5 168,3x141,3
    1x1/2 33,4x21,3 6x4 168,3x114,3
    1 1/4x1 42,2x33,4 8x6 219.1x168.3
    1 1/4x3/4 42,2x26,7 8x4 219.1x114.3
    1 1/2x1 1/4 48,3*42,2 10x8 273.1x219.1
    1 1/2x1 48,3x33,4 10x6 273.1x168.3
    2x1 1/2 60,3x48,3 12x10 323,9x273,1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60,3 14x12 355,6x323,8
    2 1/2x1 1/2 73x48,3 14x10 355,6x273,1
    3x2 1/2 88,9x73 18x16 457x406,4
    3x2 88,9x60,3 18x14 457x355,6
    4x3 114,3x88,9 20x18 508x457
    4x2 1/2 114,3x73 24x20 610x508
    5x4 141,3x114,3 24x18 610x457

    Smeltbere izeren galvanisearre en swarte fitting

    Standert: ENGB/T-3287 ; BS EN-10242; KHT300-6ensfh.

    Materiaal: smeedbaar izer

    Oerflak: Galvanisearre as natuerlik swart

    Binnen oerflak: mei of sûnder PVC Coated

    Bushing

    GRUTTE In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Uny

    GRUTTE In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    GRUTTE In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113,5
    union

    Rjochte Tee

    GRUTTE In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44,5
    GRUTTE In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48,5 57 68,5 77,5 96,5 129
    DSC00019 拷贝

    Koppeling

    GRUTTE In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    GRUTTE In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026 拷贝

    Reducing Socket

    Grutte mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Grutte mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1 ¼x1 1½x1/2 1½x 3/4 1½ x1
    A 49 49 49 53 53 53
    Grutte mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2x1/2 2x3/4 2x1 2x1¼ 2 x1½
    A 53 63 63 63 63 63
    Grutte mm 65x15 65x20 65x25 65x32 65x40 65x50
    In 2½x1/2 2½x3/4 2 1/2x2 2½ x 1¼ 2½x1½ 2 ½x2
    A 72 72 72 72 72 72
    Grutte mm 80x15 80x20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1 ¼ 3 x1½ 3x2
    A 71 71 71 71 71 71
    Grutte mm 80x65 100x15 100x20 100x25 100x32 100x40
    In 3 x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x1 ½
    A 71 84 84 84 84 84
    Grutte mm 100x50 100x65 100x80 25x20
    In 4x2 4 x2½ 4x3 1x3/4
    A 84 84 84 44
    Reducing Socket

    Achthoekige kap

    Grutte In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Grutte In 2
    mm 50
    A 32
    S 65
    Achthoekige kap

    Plain Plug

    Grutte In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 1 0 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Grutte In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40,5 45,5 51
    B 21 25 26 5 29.5
    s 22 26 30 34 44
    gewoane stekker

    Barrel tepel

    Grutte In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Grutte In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    cast_iron_nipple

    90 Elb

    Grutte ik n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Grutte In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77,5 96,5 129
    90 oar

    45 Elb

    Grutte In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Grutte In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 . 5 64 . 5 129
    45 oar

    Ferminderjen Elbow

    Grutte In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Grutte Yn 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 77 .5 96,5
    B 65 74 90 100 120
    ferminderjen fan elbow

    ReduzearjenTee

    Grutte In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Grutte In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44,5 35 37 40
    Grutte In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43,5
    B 49 53 53 54 54 57
    C 40 44,5 45 45 48,5 40
    Grutte In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54,5 59,5 49,5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47,5
    Grutte In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40x65
    A 54,5 57,5 61,5 61,5
    B 69 71 71 71
    C 51.5 54,5 59,5 59,5
    Reducing Tee 异径三通

    Grooved Fitting

    Standert: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 ensfh.

    Stielklasse: GR.A GR.B

    Oerflak: Red Painted of Blue Painted of Silver Painted

    MEGANICAL CRUS (GROOVED)

    grooved meganyske krús
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    100x50 (4x2) 114,3x60,3
    100x65 (4x2-1/2) 114,3x73
    100x65 (4x2-1/2) 114,3x76. 1
    100x80 (4x3) 114,3x88,9
    125x65 (5x2-1/2) 139.7x76. 1
    125x80 (5x3) 139,7x88,9
    150x65 (6x2-1/2) 165.1x 76. 1
    150x80 (6x3) 165.1x88.9
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x80 (8x3) 219,1x88,9
    200x100 (8x4) 219.1x114.3

    MEGANICAL CROSS (THREADED)

    threaded meganyske krús
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    50x25 (2x1) 60,3xRcl
    65x25 (2-1/2x1) 76. lxRcl
    65x40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88,9xrcl
    80x50 (3x2) 88,9xRc2
    100x25 (4x1) 108xrkl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25 (5x1) 133xrkl
    125x80 (5x3) 133xrc3
    125x25 (5x1) 139.7xRcl
    150x25 (6x1) 159xRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8x1) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    MECHANISCHE TEE (GROEF)

    grooved meganyske tee
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    100x50 (4x2) 114,3x60,3
    100x80 (4x3) 114,3x88,9
    125x65 (5x2-1/2) 139,7x76,1
    125x80 (5x3) 139,7x88,9
    150x65 (6x2-1/2) 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65 (8x2-1/2) 219.1x76.1
    200x100 (8x4) 219.1x114.3

    MEGANISCHE TEE (DREADED)

    threaded meganyske tee
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    50x25 (2x1) 60,3xRcl
    65x25 (2-1/2x1) 76. lxRcl
    65x40 (2-1/2x1-1/2) 76. lxRcl-1/2
    80x25 (3x1) 88,9xrcl
    80x50 (3x2) 88,9xRc2
    100x25 (4x1) 108xrkl
    100x65 (4x2-1/2) 108xRc2-1/2
    100x25 (4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25 (5x1) 133xrkl
    125x80 (5x3) 133xrc3
    125x25 (5x1) 139.7xRcl

    REDUCERING TEE (GROOVED)

    grooved ferminderjen tee
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    65x50 (2/1/2x2) 76,1x60,3
    80x65 (3x2-1/2) 88.9x76.1
    100x50 (4x2-1/2) 108x76.1
    100x50 (4x2) 114,3x60,3
    100x80 (4x3) 114,3x88,9
    125x100 (5x4) 133x108
    125x65 (5x2-1/2) 139,7x76,1
    125x100 (5x4) 139,7x114,3
    150x100 (6x4) 159x108
    150x125 (6x5) 159x133
    150x65 (6x2-1/2) 165.1x 76. 1
    150x125 (6x5) 165,1x139,7
    200x50 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    TEE (GROEF)

    grooved tee
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    50(2) 60,3
    65 (2-1/2) 76.1
    80(3) 88,9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139,7
    150⑹ 159
    150(6) 165.1
    150⑹ 168,3
    200⑻ 219.1

    REDUCERING CRUS (GROOVED)

    grooved ferminderjen krús
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    100x65 (4x2-1/2) 114.3x76
    100x80 (4x3) 114,3x88,9
    125x65 (5x2-1/2) 139.7x76
    125x100 (5x4) 139,7x114,3
    150x65 (6x2-1/2) 165.1x76
    150x125 (6x5) 165.1x139. 7
    200x100 (8x4) 219.1x114.3
    200x150 (8x6) 219.1x165.1

    KRUIS (GROEF)

    krús
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    65 (2-1/2) 76.1
    80⑶ 88,9
    100⑷ 114.3
    125⑸ 139,7
    150(6) 165
    200⑻ 219.1

    45° Elbow

    45° elbow

    22,5° Elbow

    22,5° elbow

    90° Elbow

    90° elbow
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    50⑵ 60,3
    65 (2-1/2) 76.1
    80⑶ 88,9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139,7
    150⑹ 159
    150⑹ 165
    200⑻ 219.1

    REDUCER (THREADED)

    Threaded fermindering
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    50x20 (2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25 (2-1/2x1) 76. lxRcl
    65 x 50 (2-1/2 x 2) 76. 1xRc2
    80x25 (3x1) 88,9xrcl
    80x65 (3x2-1/2) 88.9xRc2-1/2
    100x25 (4x1) 108xrkl
    100x25 (4x1) 114.3xRcl
    125x25 (5x1) 133xrkl
    125x25 (5x1) 139.7xRcl
    150x25 (6x1) 159xRcl
    150x80 (6x3) 159xrc3
    150x25 (6x1) 165. lxRcl
    150x80 (6x3) 165. 1xRc3
    200x25 (8xRcl) 219. lxRcl
    200x80 (8x3) 219. 1xRc3

    REDUCER (GROOVED)

    grooved ferlytser
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm)
    65 x 50 (2-1/2 x 2) 76,1x60,3
    80x50 (3x2) 88,9x60,3
    80x65 (3x2-1/2) 88.9x76.1
    100x65 (4x2-1/2) 108x76.1
    100x80 (4x3) 108x88,9
    100x50 (4x2) 114,3x60,3
    100x80 (4x3) 114,3x88,9
    125x65 (5x2-1/2) 133x76.1
    125x100 (5x4) 133x114,3
    125x50 (5x2) 139,7x60,3
    125x100 (5x4) 139,7x114,3
    150x65 (6x2-1/2) 159x76.1
    150x125 (6x5) 159x139,7
    150x50 (6x2) 165.1x60.3
    150x125 (6x5) 165,1x139,7
    200x65 (8x2) 219.1x60.3
    200x150 (8x6) 219.1x165.1

    HEAVY DUTY FLANGE

    (GROOT)

    swiere plicht flange
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm) WERKDRUK (MPA) DIMENSJES (MM) NEE. FAN GATTEN
    A B c D
    65 (2-1/2) 76.1 2.5 63,5 17 185 145 8
    65⑶ 88,9 2.5 63,5 17 200 160 8
    100⑷ 108 2.5 67,5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 219.1 2.5 77 20 360 310 12

    ADAPTER FLANGE

    (GROOT)

    ADAPTER FLANGE
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm) WERKDRUK (MPA) DIMENSJES (MM) NEE. FAN GATTEN
    A B c D
    50⑵ 60,3 1.6 50 15 160 125 4
    65 (2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88,9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139,7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 219.1 1.6 78 19 340 295 8\12

    BLIND FLANGE

    BLIND FLANGE
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm) WERKDRUK (MPA) HOOGTE (MM)
    50⑵ 60,3 2.5 28
    65 (2-1/2) 76.1 2.5 28
    80⑶ 88,9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139,7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 219.1 2.5 36,5

    THREADED FLANGE

    THREADED FLANGE
    NORMAAL SIZE (mm/in) BUITEN DIAMETER (mm) WERKDRUK (MPA) DIMENSJES (MM) NEE. FAN GATTEN
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32 (1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40 (1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50(2) Rc2 1.6 20 13 125 155 4
    65 (2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193,5 8
    100⑷ Rc4 1.6 25.75 15 180 213,5 8

    BOLTS & NUTS

    bouten en moeren
    GRUTTE THREADED LENGTE L1 TOTAL LENGTE FISHTAIL BOLT BREEDTE NUT WIDHT
    M10x55 30±3 55±1,2 14. 5±0. 5 9. 6~10
    M10 x 60 30±3 60±1,2 14,5 + 0,5 9. 6~10
    M10x65 30±3 65±1,2 14. 5±0. 5 9. 6~10
    M12x65 36+4 65±1,2 15,2±0,4 11. 6~12
    M12 x 70 36+4 70+1. 2 15,2±0,4 11. 6 ~12
    M12x75 41+4 75+1. 2 15,2±0,4 11. 6 ~12
    m16x85 44+4 85+1. 2 19. 0-19. 9 15. 3~16
    M20 x 120 50+5 120+2. 0 24±0,8 18. 9~20

    De meganyske eigenskippen fan bouten moatte net leger wêze as klasse 8.8 spesifisearre yn GB / T 3098.1, en de tried tolerânsje sil wêze 6G. De meganyske eigenskippen fan 'e moer moatte foldwaan oan Grade 8 easken spesifisearre foar moeren yn GB / T 3098.2, thread tolerânsje 6h.

    DICHTING RING

    pakking ring
    NAMME DICHTING ALGEMENE SERVICE-oanbefelling TEMPERATUURBERIK
    EPDM E Wetterfoarsjenning, ôfwettering, rioelwetter en normale temperatuerlucht, swakke soer en swak alkali -30°C~+130°C
    NBR D Petroleum basearre oaljes -20°C〜+80°C
    SILICOMN RUBBER S Drinkwetter, waarme droege loft en wat hjitte gemikaliën -40°C~+180°C

    Flens

    WELDING NECK FLANGE

    Standert: ASME / ANSI B16.9 Grade: WPB

    laske nack flange
    NPS OD ID Dikte Unit Gewicht
    inch mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48,3 17.5 1.8
    2 152 60,3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88,9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168,3 25.5 11
    8 343 219.1 29 18.3
    10 406 273 30.5 25
    12 483 323,9 32 39
    14 533 355,6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    BLIND FLANGE

    Standert: ASME / ANSI B16.9 Grade: WPB

    bline flange
    NPS OD ID Dikte ienheid gewicht
    inch mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48,3 17.5 1.6
    2 152 60,3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88,9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168,3 25.5 12
    8 343 219.1 29 21
    10 406 273 30.5 30
    12 483 323,9 32 45
    14 533 355,6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    SLIP OP FLANGE

    Standert: ASME / ANSI B16.9 Grade: WPB

    slip op flange
    NPS OD ID Dikte ienheid gewicht
    inch mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43,5 16 1.1
    1 1/2 127 49,5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90,5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170,5 25.5 7.5
    8 343 221,5 29 12.6
    10 406 276,5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410,5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    THREADED FLANGE

    Standert: ASME / ANSI B16.9 Grade: WPB

    threaded flange
    NPS OD ID Dikte ienheid gewicht
    inch mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48,3 17.5 1.5
    2 152 60,3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88,9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168,3 25.5 8.4
    8 343 219.1 29 13
    10 406 273 30.5 17.8
    12 483 323,9 32 29.5
    14 533 355,6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    WOLLE MEI US ARBEIDE?

    KONTAKT MEI ÚS OPNIMME
  • Foarige:
  • Folgjende:

    • RELATED PRODUCTS

    Druk op enter om te sykjen of ESC om te sluten