Ferrum et Ferro Pipe Fittings

Ferrum et Chalybis Pipe Fittings Featured Image
  • Ferrum et Ferro Pipe Fittings
  • Ferrum et Ferro Pipe Fittings
  • Ferrum et Ferro Pipe Fittings

Brevis descriptio:

Chalybe pipe strii sunt omnes pressi-portantes tibiae caerimoniae

HS CODEX: 73079300


  • MOQ Per Size:2 tons
  • Min. Ordo Quantitatis:Una continens
  • Tempus productionis:plerumque XXV diebus
  • Portus partus:Xingang Tianjin Portus in China
  • Termini solucionis:L/C,D/A,D/P,T/T
  • Notam:YOUFA
  • Pretium:MAL CFR CIF
  • Originis loco:China
    • Download as PDF

    Product Detail

    Product Tags

    Modi organorum fistularum secundum usus eorum distingui possunt;

    Fibulae fistulae ad tibias connectendas adhibitae: flanges, iuncturae, fibulae fistulae, manicae commissurae.
    Fistula fistularum directionem mutare solebant: cubita, anfractus.
    Tibiae decentiae solebant mutare diametrum tibiarum: reducere (eccentricas et concentricas), cubita reducere.
    Tibia fistulae ad fistulas adiiciebant: tees, cruces.
    Instrumenta fistulae ad signandum tibias adhibitae: gasketes, flanges caecae, tibiae fistulae, pilei caecorum.

    Carbon Ferro Butt iuncta et inconsutilem Pipe Fitting

    45° -90° ET CLXXX° CARBON FERRUM ELBOW

    Standard: ASME/ANSI B16.9 / ASTM A235

    Gradus: WPB; WPC

    45° Cubitus

    45° Cubitus

    XC° Cubitus

    XC° Cubitus

    180° Cubitus

    180° Cubitus

    Extra Diameter Murus Crassitudo
    (mm)    		 Theoretical Pondus
    45° 90° 180°
    UNCIA MM SCH40 KG KG KG
    1/2 21.3 2.77 0.04 0.08 0.16
    3/4 26.7 2.87 0.05 0.1 0.21
    1 33.4 3.38 0.08 0.16 0.3
    1 1/4 42.2 3.56 0.13 0.25 0.5
    1 1/2 48.3 3.68 0.18 0.38 0.72
    2 60.3 3.91 0.38 0.65 1.3
    2 1/2 73.0 5.16 0.65 1.29 2.58
    3 88.9 5.49 1.02 2.03 4.06
    3 1/2 101.6 5.74 1.22 2.45 4.87
    4 114.3 6.02 1.93 3.85 7.1
    5 141.3 6.55 3.26 6.51 13.6
    6 168.3 7.11 6.06 10.1 20.2
    8 2191 8.18 7.96 18.9 21.8
    10 273.1 9.27 12.5 25 50
    12 323.9 9.53 38.6 66.1 108
    14 355.6 9.53 34.1 68.1 136
    16 406.4 9.53 44.7 39.3 179
    18 457.2 9.53 56.5 113 226
    20 508 9.53 70 140 230
    22 558.8 9.53 77 170 340
    24 609.6 9.53 101 202 404
    26 660.4 9.53 119 238 476

    JAM REDUCER Tee

    Standard: ASME/ANSI B16.9 / ASTM A234

    Gradus: WPB; WPC

    TEE

    recta Tee

    REDUCER TEE

    reducer Tee

    Extra Diameter Extra Diameter
    UNCIA MM UNCIA MM
    3/4x3/4 26.7x26.7 6x6 168.3x168.3
    3/4x1/2 26.7x21.3 6x5 168.3x141.3
    1x1 33.4x33.4 8x8 2191.x219.1
    1x3/4 33.4x26.7 8x6 2191.x168.3
    1 1/4x1 1/4 42.2x42.2 10x8 273x219.1
    1 1/4x1 42.2x33.4 10x10 273.1x273.1
    1 1/2x1 1/2 48.3x48.3 12x12 323.8x323.8
    1 1/2x1 1/4 48.3*42.2 12x10 323.8x273.1
    2x2 60.3zx60.3 14x14 355.6x355.6
    2x1 1/2 60.3x48.3 14x12 355.6x323.8
    3x3 88.9x88.9 18x18 457x457
    3x2 1/2 88.9x73 18x16 457x406.4
    4x4 114.3x114.3 20x20 508x508
    4x3 114.3x88.9 20x18 508x457
    5x5 141.3x141.3 24x24 610x610
    5x4 141.3x114.3 24x20 610x508

    CONCENTRIC AND ECCENTRIC REDUCER

    Standard: ASME/ANSI B16.9 / ASTM A234

    Gradus: WPB; WPC

    CON REDUCER

    CON reducer

    ECC REDUCER

    ECC reducer

    Extra Diameter Extra Diameter
    UNCIA MM UNCIA MM
    3/4x1/2 26.7x21.3 5x3 141.3x88.9
    1X3/4 33.4X26.7 6x5 168.3x141.3
    1x1/2 33.4x21.3 6x4 168.3x114.3
    1 1/4x1 42.2x33.4 8x6 2191.x168.3
    1 1/4x3/4 42.2x26.7 8x4 2191.x114.3
    1 1/2x1 1/4 48.3*42.2 10x8 273.1x219.1
    1 1/2x1 48.3x33.4 10x6 273.1x168.3
    2x1 1/2 60.3x48.3 12x10 323.9x273.1
    2x1 60.3zx33.4 12x8 323.9x219.1
    2 1/2x2 73x60.3 14x12 355.6x323.8
    2 1/2x1 1/2 73x48.3 14x10 355.6x273.1
    3x2 1/2 88.9x73 18x16 457x406.4
    3x2 88.9x60.3 18x14 457x355.6
    4x3 114.3x88.9 20x18 508x457
    4x2 1/2 114.3x73 24x20 610x508
    5x4 141.3x114.3 24x18 610x457

    Ferrum oboediens Galvanized et Niger Fitting

    Standard: ENGB/T-3287 ; BS EN-10242; KHT300-6etc.

    Materia: Malleable ferrum

    Superficies: Galvanized sive Naturalis Niger

    Superficiem interiorem: Cum aut sine PVC Coated

    Bushing

    MENSURA In 3/8*1/4 1/2*1/4 1/2*3/8 3/4*3/8 3/4*1/2 1*1/2
    mm 10x8 18x8 15x10 20x10 20x15
    L 18.5 22.5 22.5 24.5 24.5 28
    H 6 6 6 6 6 6
    S 18.4 22 22 29.6 29.6 37.4
    Bushing

    Unionis

    MENSURA In 1/2 3/4 1 1 1/4 1 1/2 2
    mm 15 20 25 32 40 50
    L 46 50 56 63 68 76
    MENSURA In 2 1/2 3 4
    mm 65 80 100
    L 83 93 113.5
    unio

    recta Tee

    MENSURA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44.5
    MENSURA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    A 48.5 57 68.5 77.5 96.5 129
    DSC000019

    Copulatio

    MENSURA In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 26 29 35 38 44 49
    MENSURA In 1 1/2 2 2 1/2 3 4 6
    mm 40 50 65 80 100 150
    L 53 63 72 77 91 118
    DSC00026

    Reducing Socket

    Magnitudo mm 10x8 15x8 15x10 20x15 25x10 25x15
    In 3/8x1/4 1/2x1/4 1/2x3/8 3/4x1/2 1x3/8 1x1/2
    A 29 35 36 38 44 44
    Magnitudo mm 32x15 32x20 32x25 40x15 40x20 40x25
    In 1¼x1/2 1¼x3/4 1¼ x1 1½x1/2 1 x 3/4 1½ x1
    A 49 49 49 53 53 53
    Magnitudo mm 40x32 50x15 50x20 50x25 50x32 50x40
    In 1½x1¼ 2 x1/2 2x3/4 2x1 2x1¼ 2x1½
    A 53 63 63 63 63 63
    Magnitudo mm 65x15 65 x 20 65x25 65x32 65x40 65x50
    In 2½x1/2 2 x3/4 2 1/2x2 2½ x1¼ 2 x1½ 2 x2
    A 72 72 72 72 72 72
    Magnitudo mm 80x15 80x 20 80x25 80x32 80x40 80x50
    In 3 x 1/2 3x3/4 3x1 3x1¼ 3x1½ 3x2
    A 71 71 71 71 71 71
    Magnitudo mm 80x65 100 x15 100x20 100 x 25 100x32 100x40
    In 3x2½ 4x1/2 4x3/4 4x1 4x1¼ 4x 1½
    A 71 84 84 84 84 84
    Magnitudo mm 100x50 100x 65 100x80 25x20
    In 4x2 4x2½ 4x3 1x3/4
    A 84 84 84 44
    Reducing Socket

    Octagonal Cap

    Magnitudo In 3/8 1/2 3/4 1 1 1/4 1 1/2
    mm 10 15 20 25 32 40
    A 17 19 22 24 27 28
    S 20.6 24.6 30.4 37.2 47 53
    Magnitudo In 2
    mm 50
    A 32
    S 65
    Octagonal Cap

    Patet Plug

    Magnitudo In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    L 15.5 17 22.5 24 27 30
    B 1 0 10 13 14 16 5 20
    S 6 7 10 12 15 18
    Magnitudo In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    L 31 36 40.5 45.5 51
    B 21 25 XXVI 5 29.5
    s 22 26 30 34 44
    patet obturaculum

    Ferocactus Nipple

    Magnitudo In 1/4 3/8 1/2 3/4 1 1 1/4
    mm 8 10 15 20 25 32
    L 36 36 44 47 53 56
    S 16.7 19.2 23.6 29.2 36 45
    Magnitudo In 1 1/2 2 2 1/2 3 4
    mm 40 50 65 80 100
    L 58 68 73 81 95
    S 63 63 79.4 91.6 117
    cast_iron_nipple

    90 Cubitus

    Magnitudo I n 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 24 27 32 37 44 .5
    Magnitudo In 1½ 2 2Y. 3 4 6
    mm 40 50 65 80 10 0 150
    A 48 .5 57 68 .5 77.5 96.5 129
    XC cubitus

    45 Cubitus

    Magnitudo In 1/2 3/4 1 1¼ 1½ 2
    mm 15 20 25 32 40 50
    A 22 25 28 33 36 43
    Magnitudo In 2½ 3 4 6
    mm 65 80 100 150
    A 48 .5 53 . 5 [64]. 5 129
    45 cubiti

    Cubitus reducing

    Magnitudo In 1/4 3/8 1/2 3/4 1 1¼
    mm 8 10 15 20 25 32
    A 20 25 28 33 38 45
    B 28 33 38 44 52 60
    Magnitudo In 1½ 2 2½ 3 4
    mm 40 50 65 80 100
    A 50 58 69 LXXVII .5 96.5
    B 65 74 90 100 120
    reducing cubito

    ReducingTee

    Magnitudo In 1.25x1/2x1 1 1/4x3/4x1 1 1/4x1x1 11/2x1/2x1 1/4 1 1/2x3/4x1 1/4 1 1/2x1x1
    mm 32x15x25 32x20x25 32x25x25 40x15x32 40x20x32 40x25x25
    A 34 36 39 35 37 40
    B 37 40 40 41 43 44
    C 31 34 36 34 36 36
    Magnitudo In 1 1/2x1x1 1/4 1 1/2x1 1/4x1 1 1/2x1 1/4x1 1/4 2x1/2x1 1/2 2x3/4x1 1/2 2x1x1 14
    mm 40x25x32 40x32x25 40x32x32 50x15x40 50x20x40 50x25x32
    A 41 45 45 37 40 43
    B 45 47 47 47 49 51
    C 40 41 44.5 35 37 40
    Magnitudo In 2x1x1 1/2 2x1 1/4x1 1/4 2x1 1/4x1 1/2 2x1/2x1 2x1 1/2x1 1/2 2 1/2x3/4x2
    mm 50x25x40 50x32x32 50x32x40 50x40x25 50x40/40 65x20/50
    A 42 47 47 51 51 43.5
    B 49 53 53 54 54 57
    C 40 44.5 45 45 48.5 40
    Magnitudo In 2 1/2x1x2 2x1 1/4x1 1/2 2 1/2x1 1/4x2 2 1/2x1 1/2x2 2 1/2x2x2 3x1x2 1/2
    mm 65x25x50 65x32x40 65x32x50 65x40x50 65x50x50 80x25x65
    A 45 51.5 51.5 54.5 59.5 49.5
    B 58 61 61 61 64 67
    C 42 45 47 51 57 47.5
    Magnitudo In 3x1 1/4x2 1/2 3x1 1/2x2 1/2 3x2x2 1/2 3x2 1/2x2 1/2
    mm 80x32x65 80x40x65 80x50/65 80x40 x65
    A 54.5 57.5 61.5 61.5
    B 69 71 71 71
    C 51.5 54.5 59.5 59.5
    Reducing Tee

    Striata

    Latin: ANSI B36.10, JIS B2302, ASME/ANSI/BS1560/DIN2616 etc.

    Ferro gradus: GR.A GR.B

    Superficies: Red pingitur vel caeruleo picta vel Argentea picta

    MECHANALIS CRUCIS (GRAVATUS)

    striata mechanica crucis
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    100x50(4x2) 114.3x60.3
    100x65 (4x2-1/2) 114.3x73
    100x65 (4x2-1/2) 114.3x76. 1
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76. 1
    125x80(5x3) 139.7x88.9
    150x65(6x2-1/2) 165.1x 76. 1
    150x80(6x3) 165.1x88.9
    150x100(6x4) 165.1x114.3
    200x65(8x2-1/2) 219.x76.1
    200x80(8x3) 219.x88.9
    200x100(8x4) 2191.x114.3

    MECHANALIS CRUCIS (FILA)

    mechanica crucis staminea
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl .
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 165. 1xRc3
    200x25(8x1) 219. lxRcl
    200x80(8x3) 219. 1xRc3

    Mechanica Tee (GROOVED)

    striatus mechanica Tee
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    100x50(4x2) 114,3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76.1
    125x80(5x3) 139.7x88.9
    150x65 (6x2-1/2） 165.1x76.1
    150x100 (6x4) 165.1x114.3
    200x65(8x2-1/2) 219.x76.1
    200x100(8x4) 2191.x114.3

    Mechanica Tee (FILA)

    mechanica Tee staminea
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    50x25(2x1) 60.3xRcl
    65x25(2-1/2x1) 76. lxRcl .
    65x40(2-1/2x1-1/2) 76. lxRcl-1/2
    80x25(3x1) 88.9xRcl
    80x50(3x2) 88.9xRc2
    100x25(4x1) 108xRcl
    100x65 (4x2-1/2) 108xRc2-1/2
    100x25(4x1) 114.3xRcl
    100x65 (4x2-1/2) 114.3xRc2-1/2
    125x25(5x1) 133xRcl
    125x80(5x3) 133xRc3
    125x25(5x1) 139.7xRcl

    REDUCING Tee (GROOVED)

    canaliculatus reducing Tee
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    65x50(2/1/2x2) 76.1x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x50 (4x2-1/2) 108x76.1
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x100(5x4) 133x108
    125x65(5x2-1/2) 139.7x76.1
    125x100 (5x4) 139.7x114.3
    150x100(6x4) 159x108
    150x125(6x5) 159x133
    150x65 (6x2-1/2） 165.1x 76. 1
    150x125(6x5) 165.1x139.7
    200x50(8x2) 219.x60.3
    200x150(8x6) 2191.x165.1

    Tee (GROOVED)

    sulcatus Tee
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    50 (2). 60.3
    65(2-1/2) 76.1
    80 (3) 88.9
    100⑷ 108
    100⑷ 114.3
    125(5) 133
    125(5) 139.7
    150⑹ 159
    150 (6) 165.1
    150⑹ 168.3
    200⑻ 2191

    REDUCING CRUCIS (GROOVED)

    sulcatus reducing crucis
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    100x65 (4x2-1/2) 114.3x76
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 139.7x76
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 165.1x76
    150x125(6x5) 165.1x139. 7
    200x100(8x4) 2191.x114.3
    200x150(8x6) 2191.x165.1

    CRUCE (GRAVATUS)

    transire
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 114.3
    125⑸ 139.7
    150 (6) 165
    200⑻ 2191

    45° Cubitus

    45° cubiti

    22.5° Cubitus

    22.5° cubitus

    XC° Cubitus

    cubito XC°
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    50⑵ 60.3
    65(2-1/2) 76.1
    80⑶ 88.9
    100⑷ 108
    100⑷ 114.3
    125⑸ 133
    125(5) 139.7
    150⑹ 159
    150⑹ 165
    200⑻ 2191

    REDUCER (fila)

    Re reducer
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    50x20(2x3/4) 60.3xRc3/4
    50x40 (2x1-1/2) 60.3xRcl-1/2
    65x25(2-1/2x1) 76. lxRcl .
    65 x 50 (2-1/2 x 2). 76. 1xRc2
    80x25(3x1) 88.9xRcl
    80x65(3x2-1/2) 88.9xRc2-1/2
    100x25(4x1) 108xRcl
    100x25(4x1) 114.3xRcl
    125x25(5x1) 133xRcl
    125x25(5x1) 139.7xRcl
    150x25(6x1) 159xRcl
    150x80(6x3) 159xRc3
    150x25(6x1) 165. lxRcl
    150x80(6x3) 165. 1xRc3
    200x25(8xRcl) 219. lxRcl
    200x80(8x3) 219. 1xRc3

    REDUCER (GROOVED)

    sulcatus reducer
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm)
    65 x 50 (2-1/2 x 2). 76.1x60.3
    80x50(3x2) 88.9x60.3
    80x65(3x2-1/2) 88.9x76.1
    100x65 (4x2-1/2) 108x76.1
    100x80(4x3) 108x88.9
    100x50(4x2) 114.3x60.3
    100x80(4x3) 114.3x88.9
    125x65(5x2-1/2) 133x76.1
    125x100(5x4) 133x114.3
    125x50(5x2) 139.7x60.3
    125x100(5x4) 139.7x114.3
    150x65(6x2-1/2) 159x76.1
    150x125(6x5) 159x139.7
    150x50(6x2) 165.1x60.3
    150x125(6x5) 165.1x139.7
    200x65(8x2) 219.x60.3
    200x150(8x6) 2191.x165.1

    GRAVIS LABIUM OFFICIUM

    (GROOVED)

    gravibus officium LABIUM
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm) Pressura EXERCITUS (MPA) DIMENSIONES(MM) NO. CAULAE
    A B c D
    65(2-1/2) 76.1 2.5 63.5 17 185 145 8
    65 88.9 2.5 63.5 17 200 160 8
    100⑷ 108 2.5 67.5 16.5 235 190 8
    100⑷ 114.3 2.5 68 15 230 190 8
    150⑹ 159 2.5 68 17 300 250 8
    150⑹ 165.1 2.5 68 17 300 250 8
    200⑻ 2191 2.5 77 20 360 310 12

    nibh LABIUM

    (GROOVED)

    nibh LABIUM
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm) Pressura EXERCITUS (MPA) DIMENSIONES(MM) NO. CAULAE
    A B c D
    50⑵ 60.3 1.6 50 15 160 125 4
    65(2-1/2) 76.1 1.6 50 15 178 145 4
    80⑶ 88.9 1.6 50 15 194 160 8
    100⑷ 108 1.6 55 15 213 180 8
    100⑷ 114.3 1.6 55 15 213 180 8
    125⑸ 133 1.6 58 17 243 210 8
    125⑸ 139.7 1.6 58 17 243 210 8
    150⑹ 159 1.6 65 17 280 240 8
    150⑹ 165.1 1.6 65 17 280 240 8
    200⑻ 2191 1.6 78 19 340 295 8\12

    CAECUS LABIUM

    CAECUS LABIUM
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm) Pressura EXERCITUS (MPA) ALTITUDO (MM)
    50⑵ 60.3 2.5 28
    65(2-1/2) 76.1 2.5 28
    80⑶ 88.9 2.5 29
    100⑷ 108 2.5 31
    100⑷ 114.3 2.5 31
    125(5) 133 2.5 31.5
    125⑸ 139.7 2.5 31.5
    150⑹ 159 2.5 31.5
    150⑹ 165.1 2.5 31
    200⑻ 2191 2.5 36.5

    FILA LABIUM

    FILA LABIUM
    INENORMIS MENSURA (mm/in) EXTRA DIAMETROS (mm) Pressura EXERCITUS (MPA) DIMENSIONES(MM) NO. CAULAE
    A B c D
    25⑴ Rcl 1.6 18 10 85 110 4
    32 (1-1/4) Rcl-1/4 1.6 18 11 100 130 4
    40(1-1/2) Rcl-1/2 1.6 19 13 110 145 4
    50 (2). Rc2 1.6 20 13 125 155 4
    65(2-1/2) Rc2-1/2 1.6 21 15 144 178 4
    80⑶ Rc3 1.6 25.5 15 160 193.5 8
    100⑷ Rc4 1.6 25.75 15 180 213.5 8

    BOLTS & NUTS

    fulmina et nuces
    MENSURA LATET L1 TOTAL TANDEM FISHTAIL TELUM AMPLITUDO NUT WIDHT
    M10 x 55 30±3 55±1.2 14. 5±0. 5 9. 6~10
    M10 x 60 30±3 60±1.2 14.5 + 0.5 9. 6~10
    M10 x 65 30±3 65±1.2 14. 5±0. 5 9. 6~10
    M12 x 65 36+4 65±1.2 15.2±0 11. 6~12
    M12 x 70 36+4 LXX+1. 2 15.2±0 11. 6 ~12
    M12 x 75 41+4 75+1. 2 15.2±0 11. 6 ~12
    M16 x 85 44+4 85+1. 2 19. 0-19. 9 15. 3~16
    M20 x 120 50+5 120+2. 0 24±0.8 18. 9~20

    Mechanica fulminum proprietates non inferiores erunt quam gradu 8.8 in GB/T 3098.1 specificatae, et linum tolerantia erit 6G. Mechanica proprietas nucis cum Grade 8 requisitis de nucibus determinatis in GB / T 3098,2, tolerantiae filum 6h.

    GASKET Ring

    gasket anulum
    NAME GASKET COMMENDATIO GENERALIS SERVITIUM TEMPERATURA dolor
    EPDM E Aquarum copia, INCILE, purgamentorum ac aeris temperamentum normale, acidum debile et alcali debile -30°C~+30°C
    NBR D Olea petroleum fundatur -20°C〜+80°C
    SILICOMN TRITOR S Aquam bibere, aerem calidum siccum et chemicals calidas -40°C~+180°C

    Flange

    WELDING CONL LABIUM

    Standard: ASME/ANSI B16.9 Grade: WPB

    iuncta nack LABIUM
    NPS OD ID Crassitudo Unit Pondus
    digitis mm mm mm kgs
    1/2 89 21.3 11.5 0.5
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 1.1
    1 1/4 117 42.4 16 1.5
    1 1/2 127 48.3 17.5 1.8
    2 152 60.3 19.5 2.7
    2 1/2 178 73 22.5 4.4
    3 190 88.9 24 5.2
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.5
    5 254 141.3 24 9.2
    6 279 168.3 25.5 11
    8 343 2191 29 18.3
    10 406 273 30.5 25
    12 483 323.9 32 39
    14 533 355.6 35 51
    16 597 406.4 37 60
    18 635 457 40 71
    20 698 508 43 88
    24 813 610 48 119

    CAECUS LABIUM

    Standard: ASME/ANSI B16.9 Grade: WPB

    caecus LABIUM
    NPS OD ID Crassitudo unitas pondus
    digitis mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 16 0.9
    1 1/4 117 42.4 16 1.3
    1 1/2 127 48.3 17.5 1.6
    2 152 60.3 19.5 2.6
    2 1/2 178 73 22.5 4.1
    3 190 88.9 24 5
    3 1/2 216 101.6 24 6.4
    4 229 114.3 24 7.1
    5 254 141.3 24 9
    6 279 168.3 25.5 12
    8 343 2191 29 21
    10 406 273 30.5 30
    12 483 323.9 32 45
    14 533 355.6 35 59
    16 597 406.4 37 79
    18 635 457 40 97
    20 698 508 43 124
    24 813 610 48 188

    LABOR LABOR

    Standard: ASME/ANSI B16.9 Grade: WPB

    lapsum LABIUM
    NPS OD ID Crassitudo unitas pondus
    digitis mm mm mm kgs
    1/2 89 22.5 11.5 0.4
    3/4 99 28 13 0.7
    1 108 34.5 14 0.8
    1 1/4 117 43.5 16 1.1
    1 1/2 127 49.5 17.5 1.4
    2 152 62 19.5 2.2
    2 1/2 178 73 22.5 3.6
    3 190 90.5 24 4.1
    3 1/2 216 103.5 24 5.2
    4 229 116 24 5.6
    5 254 144 24 6.3
    6 279 170.5 25.5 7.5
    8 343 221.5 29 12.6
    10 406 276.5 30.5 18.5
    12 483 327 32 28
    14 533 359 35 36
    16 597 410.5 37 46
    18 635 462 40 50
    20 698 513 43 64
    24 813 616 48 89

    FILA LABIUM

    Standard: ASME/ANSI B16.9 Grade: WPB

    lina LABIUM
    NPS OD ID Crassitudo unitas pondus
    digitis mm mm mm kgs
    1/2 89 21.3 11.5 0.4
    3/4 99 26.9 13 0.7
    1 108 33.7 14.5 0.9
    1 1/4 117 42.4 16 1.2
    1 1/2 127 48.3 17.5 1.5
    2 152 60.3 19.5 2.3
    2 1/2 178 76.1 22.5 3.7
    3 190 88.9 24 4.2
    3 1/2 216 101.6 24 5.3
    4 229 114.3 24 5.9
    5 254 141.3 24 7
    6 279 168.3 25.5 8.4
    8 343 2191 29 13
    10 406 273 30.5 17.8
    12 483 323.9 32 29.5
    14 533 355.6 35 39
    16 597 406.4 37 47
    18 635 457 40 50
    20 696 508 43 68
    24 813 610 48 93

    USUS laborare vis?

    Contact Us
  • Priora:
  • Next:

    • AGNATUS PRODUCTS

    Intrare quaerere vel ESC claudere